- Coatings, paints & inks
Baymedix® FP504
Baymedix® FP504 is an aliphatic, hydrophilic prepolymer based on hexamethylene diisocyanate (HDI).
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Baymedix® FP504 is an aliphatic, hydrophilic prepolymer based on hexamethylene diisocyanate (HDI). Baymedix® FP504 can be used for the preparation of aliphatic polyurethane foams.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 15 - 30 °C.
- Protect from moisture, heat and foreign material.
General information : The product is highly sensitive to moisture and reacts with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. Water in any form (moist air, water-containing solvents, wet containers) must be prevented from gaining access. A dangerous build-up of pressure can occur through the generation of carbon dioxide. Storage at higher temperatures will result in increase of color and viscosity.
- Recommended storage temperature: 15 - 30 °C.
- Protect from moisture, heat and foreign material.
General information : The product is highly sensitive to moisture and reacts with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. Water in any form (moist air, water-containing solvents, wet containers) must be prevented from gaining access. A dangerous build-up of pressure can occur through the generation of carbon dioxide. Storage at higher temperatures will result in increase of color and viscosity.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 20 °C | DIN 51757 | g/cm^3 | approx. 1.1 |
| Solids content | % | approx. 100 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | approx. 3,000 |
| Monomer content (HDI) | M106-ISO 10283 | % | ≤ 0.29 |
| NCO content | M105-ISO 11909 | % | 4.95 - 5.65 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
