- Adhesives
- Coatings, paints & inks
Baymedix® AP536
Aliphatic polyisocyanate (low-viscosity HDI trimer).
i
Market Switch
Selection will influence the results you get.
About
Product Types
- HDI
- Aliphatic polyisocyanate
- Polyisocyanate
- Reactive system
Material
- Adhesives
- Heat activated, Solvent-free
General Characterization
Aliphatic polyisocyanate (low-viscosity HDI trimer).
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture and will react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. Water in any form (moist air, water-containing solvents, wet containers) must be prevented from gaining access. A dangerous build-up of pressure can occur through the generation of carbon dioxide.
Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture and will react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. Water in any form (moist air, water-containing solvents, wet containers) must be prevented from gaining access. A dangerous build-up of pressure can occur through the generation of carbon dioxide.
Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Equivalent weight | approx. 183 | ||
| Density at 20 °C | DIN EN ISO 2811 | g/ml | approx. 1.16 |
| Flash point | DIN 53213/1 | °C | approx. 158 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | 1,200 ± 300 |
| Color value (Hazen) | M017-EN 1557 | ≤ 40 | |
| Monomeric HDI | M106-ISO 10283 | % | ≤ 0.09 |
| NCO content | M105-ISO 11909 | % | 23.0 ± 0.5 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
