Bayhydrol® XP 2637
Bayhydrol XP 2637 is a an ionic/non-ionic polycarbonate ester polyurethane dispersion. Bayhydrol XP 2637 is a solvent-free polyurethane dispersion which can be used to formulate coatings that harden at room temperature or baking coatings. It allows coating of a wide variety of substrates ranging from hard ones to flexible ones such as leather, textiles, plastics and metals. Coatings formulated with Bayhydrol XP 2637 exhibit high scratch resistance and lightfastness. Other benefits of Bayhydrol XP 2637 are good aging stability and very good hydrolysis resistance.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Bayhydrol XP 2637 is a an ionic/non-ionic polycarbonate ester polyurethane dispersion.
Bayhydrol XP 2637 is a solvent-free polyurethane dispersion which can be used to formulate coatings that harden at room temperature or baking coatings. It allows coating of a wide variety of substrates ranging from hard ones to flexible ones such as leather, textiles, plastics and metals.
Coatings formulated with Bayhydrol XP 2637 exhibit high scratch resistance and lightfastness. Other benefits of Bayhydrol XP 2637 are good aging stability and very good hydrolysis resistance.
Bayhydrol XP 2637 is a solvent-free polyurethane dispersion which can be used to formulate coatings that harden at room temperature or baking coatings. It allows coating of a wide variety of substrates ranging from hard ones to flexible ones such as leather, textiles, plastics and metals.
Coatings formulated with Bayhydrol XP 2637 exhibit high scratch resistance and lightfastness. Other benefits of Bayhydrol XP 2637 are good aging stability and very good hydrolysis resistance.
Storage Conditions
Bayhydrol XP 2637 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to maximum 50°C has no adverse effect on product properties. Recommended storage temperature is 5º-40ºC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Density at 23°C | g/ml | approx. 1.1 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Viscosity at 23°C, D = approx. 40s^-1 | mPa∙s | ≤ 750 | |
Non-volatile content (1g/1h/125^oC) | % | 38 - 42 | |
pH value | 6.5 - 8.5 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com