Bayhydrol® UH 2891
Anionic aliphatic polyester-polyurethane dispersion
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Anionic aliphatic polyester-polyurethane dispersion.
It can be used for the formulation of elastomeric construction coatings.
It can be used for the formulation of elastomeric construction coatings.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 5 - 30 °C.
- Protect from frost, heat and foreign material.
General information: The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to max. 50 °C has no adverse effect on product properties.
- Recommended storage temperature: 5 - 30 °C.
- Protect from frost, heat and foreign material.
General information: The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to max. 50 °C has no adverse effect on product properties.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Density at 23 °C | DIN EN ISO 2811/3 | g/cm^3 | approx. 1.1 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
pH | DIN ISO 976 | 7.0 ± 1 | |
Non-volatile content (1 g / 1 h / 125 °C) | DIN EN ISO 3251 | % | 40 ± 1 |
Viscosity at 23°C spindle L1/30 rpm | M092-ISO 2555 | mPa.s | < 100 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com