- Coatings, paints & inks
Bayhydrol® UH 2864
Anionic aliphatic polyurethane dispersion. It can be used alone or blended with polyacrylic emulsion for the formulation of waterproofing membrane coatings and elastomeric construction coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- Non-reactive system
- Polyurethane
- Waterbased dispersion
- PU dispersion - high molecular
- PU dispersion
Material
- Coatings, paints & inks
- Solvent-free, Waterborne
General Characterization
Anionic aliphatic polyester-polyurethane dispersion.
It can be blended with polyacrylic emulsion for the formulation of elastomeric construction coatings.
It can be blended with polyacrylic emulsion for the formulation of elastomeric construction coatings.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 5 - 30 °C.
- Protect from frost, heat and foreign material.
General information: The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to max. 50 °C has no adverse effect on product properties.
- Recommended storage temperature: 5 - 30 °C.
- Protect from frost, heat and foreign material.
General information: The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to max. 50 °C has no adverse effect on product properties.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 23 °C | DIN EN ISO 2811/3 | g/cm^3 | approx. 1.1 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| pH | DIN ISO 976 | 6 - 8 | |
| Non-volatile content (1 g / 1 h / 125 °C) | DIN EN ISO 3251 | % | 57 - 61 |
| Viscosity at 23°C spindle L2/30 rpm | M092-ISO 2555 | mPa.s | < 1500 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
