Bayhydrol® A 2457
Anionic polyacrylic dispersion.As a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU).
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Bayhydrol A 2457 is an anionic polyacrylic dispersion.
It is suitable as a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU).
It is suitable as a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU).
Storage Conditions
Bayhydrol A 2457 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. Short-time cooling down to -18ºC does not typically damage the product. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Recommended storage temperature is > 0º-30ºC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 20°C | g/ml | approx. 1.1 | |
| Hydroxyl content (on solid resin, calculated) | % | approx. 2.5 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 23°Cat 23°C, D= approx. 42 s^-1 | mPa∙s | max. 100 | |
| pH (supply form) | 7.5 - 9.0 | ||
| Non-volatile content (1g/1h/125°C convection oven) | % | 38.5 - 41.5 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
