- Coatings, paints & inks
Bayhydrol® A 2457
Anionic polyacrylic dispersion.As a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU).
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- Acrylate dispersion
Material
- Coatings, paints & inks
- Elastic, Hard, Solvent-free, Waterborne, Flexible
General Characterization
Anionic polyacrylic dispersion.
As a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU).
As a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU).
Storage Conditions
- Storage in original sealed Covestro containers.
- Recommended storage temperature: > 0 ≤ 30 °C.
- Protect from frost, heat and foreign material.
General information: Short-time cooling down to -18 °C does not typically damage the product. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unusable.
On the basis of the given intrinsic product properties and the respective circumstances during storage the product may show a slight film formation also in the original packaging. Pre-filtration of the material before use is recommended.
- Recommended storage temperature: > 0 ≤ 30 °C.
- Protect from frost, heat and foreign material.
General information: Short-time cooling down to -18 °C does not typically damage the product. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unusable.
On the basis of the given intrinsic product properties and the respective circumstances during storage the product may show a slight film formation also in the original packaging. Pre-filtration of the material before use is recommended.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 20 °C | DIN EN ISO 2811-2 | g/ml | approx. 1.1 |
| OH % on solid | calculated | % | approx. 2.5 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| pH-value | DIN ISO 976 | 7.5 - 9 | |
| Viscosity at 23 °C at 23 °C, D = approx. 42 s^-1 | DIN EN ISO 3219/A.3 | mPa*s | max. 100 |
| Non-volatile content (1 g/1 h/125 °C/convection oven) | DIN EN ISO 3251 | % | 38.5 - 41.5 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
