- Plastics
Bayblend® FR633 GR
(PC+ABS)-Blend; low viscocity; non-reinforced; flame retardant; impact modified; improved chemical resistance; Easy flow; contains 30% post consumer PC recyclate for natural color; Housing; for: information technology
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Plastics
- CQ mechanical recycled
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Barrel Temperatures - Front | - | °C | 240 - 250 | |
| Barrel Temperatures - Middle | - | °C | 235 - 245 | |
| Barrel Temperatures - Nozzle | - | °C | 260 - 270 | |
| Barrel Temperatures - Rear | - | °C | 230 - 240 | |
| Dry Air Drying Temperature | - | °C | 75 | |
| Dry Air Drying Time | - | h | 4 - 6 | |
| Melt temperatures | - | °C | 240 - 280 | |
| Mold Temperatures | - | °C | 60 - 85 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Burning behavior UL 94 (1.5 mm) [UL recognition] | UL 94 | Class | V-0 | |
| Burning behavior UL 94 [UL recognition] | UL 94 | 1.0 mm | Class | V-1 |
| Burning behavior UL 94-5V [UL recognition] | UL 94 | 1.5 mm | Class | 5VB |
| Coefficient of linear thermal expansion, normal | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.75 |
| Coefficient of linear thermal expansion, parallel | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.68 |
| Temperature of deflection under load | ISO 75-1,-2 | 0.45 MPa | °C | 83 |
| Temperature of deflection under load | ISO 75-1,-2 | 1.80 MPa | °C | 74 |
| Vicat softening temperature | ISO 306 | 50 N; 120 °C/h | °C | 90 |
| Vicat softening temperature | ISO 306 | 50 N; 50 °C/h | °C | 87 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Strain at break | b.o. ISO 527-1,-2 | 50 mm/min | % | >75 |
| Stress at break | ISO 527-1,-2 | 50 mm/min | MPa | 45 |
| Tensile modulus | ISO 527-1,-2 | 1 mm/min | MPa | 2650 |
| Yield strain | ISO 527-1,-2 | 50 mm/min | % | 3.5 |
| Yield stress | ISO 527-1,-2 | 50 mm/min | MPa | 58 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Melt volume-flow rate | ISO 1133 | 240 °C/ 5 kg | cm³/10 min | 35 |
| Molding shrinkage, normal | ISO 294-4 | 60x60x2 mm³/ 240 °C/ MT 80 °C/ 500 bar | % | 0.4-.0.6 |
| Molding shrinkage, parallel | ISO 294-4 | 60x60x2 mm³/ 240 °C/ MT 80 °C/ 500 bar | % | 0.4-0.6 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Injection molding - Melt temperature | ISO 294 | °C | 240 | |
| Injection molding - Mold temperature | ISO 294 | °C | 80 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Density | ISO 1183-1 | kg/m³ | 1190 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
