Arcol® Polyol HS-200 - for flexible slabstock foams
Arcol® Polyol HS 200 is an inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx. 49 % by weight. It can be used for the production of conventional slabstock foams with very high loadbearing properties. Arcol® Polyol HS 200 may be also used as the secondary polyol in the Ultracel® technology for high resilience (HR) slabstock foam to provide additional loadbearing properties to Ultracel® 2009 polyol based foams.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Arcol® Polyol HS 200 is an inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx. 49 % by weight.
It can be used for the production of conventional slabstock foams with very high loadbearing properties.
Arcol® Polyol HS 200 may be also used as the secondary polyol in the Ultracel® technology for high resilience (HR) slabstock foam to provide additional loadbearing properties to Ultracel® 2009 polyol based foams.
It can be used for the production of conventional slabstock foams with very high loadbearing properties.
Arcol® Polyol HS 200 may be also used as the secondary polyol in the Ultracel® technology for high resilience (HR) slabstock foam to provide additional loadbearing properties to Ultracel® 2009 polyol based foams.
Storage Conditions
Recommended storage temperature (°C): 10 - 35.
Shelf life (ex works)
12 months if stored in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Recommended temperature for processing (°C): 20 - 25.
Shelf life (ex works)
12 months if stored in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Recommended temperature for processing (°C): 20 - 25.
Sampling
Moisture access must be prevented when taking product samples.
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Viscosity 25 °C | PET-10-01 | mPa*s | 3900 - 5200 |
TDI basic value | pbw Desmodur® T on 100 pbw Acol® Polyol HS 200 | 4 | |
Density 20 °C | DIN 51757 | g/cm³ | approx. 1.06 |
Appearance | PET-03-04 | opaque white liquid |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Hydroxyl number | PET-11-01 | mg KOH/g | 23.5 - 27.5 |
Hydroxyl number | PET-11-01 | mg KOH/g | 23.5 - 27.5 |
Water content | PET-19-01 | % by wt. | ≤ 0.06 |
Water content | PET-19-01 | % by wt. | ≤ 0.06 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com