Arcol® Polyol 1107
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Arcol® Polyol 1107 is a low VOC (volatile organic compounds) inactive propylene oxide/ethylene oxide polyether triol. It is used extensively in conventional flexible polyether slabstock foams, either as the standard base polyol, or in combination with other polyols, to achieve particular effects and foam properties.
Storage Conditions
Recommended storage temperature (°C): 10 - 35
Product must be stored in in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately. The lapse of this period does not necessarily mean that the product no
longer meets specifications. However, prior to using said product, Covestro
recommends to test such a product if it still meets the specifications. Covestro
does not make any representation regarding the product after the period and
Covestro shall not be responsible or liable in any way for the product failing to
meet specifications after the period.
Recommended temperature for processing (°C): 20 - 25.
Product must be stored in in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately. The lapse of this period does not necessarily mean that the product no
longer meets specifications. However, prior to using said product, Covestro
recommends to test such a product if it still meets the specifications. Covestro
does not make any representation regarding the product after the period and
Covestro shall not be responsible or liable in any way for the product failing to
meet specifications after the period.
Recommended temperature for processing (°C): 20 - 25.
Sampling
Moisture access must be prevented when taking product samples.
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density 25 °C | DIN 51757 | g/cm³ | 1.02 |
| Colour | colourless | ||
| Viscosity 25 °C | PET-10-01 | mPa*s | 500 - 620 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Unsaturates | PET-18-01 | mAeq/g | ≤ 0.050 |
| Water content | PET-19-01 | % by wt. | ≤ 0.10 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 46 - 50 |
| Colour APHA | PET-06-01 | ≤ 40 | |
| Water content | PET-19-01 | % by wt. | ≤ 0.10 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 46 - 50 |
| Colour APHA | PET-06-01 | ≤ 40 | |
| Unsaturates | PET-18-01 | mAeq/g | ≤ 0.050 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
