Submit
Case study

Makrofol® PC Film enables durable in-mold electronics (IME)

Our lightweight, scratch-resistant Makrofol® SR906 7-2 Polycarbonate Film enabled DuraTech Industries to apply in-mold electronics (IME) for the Watlow PM Plus™ industrial temperature controller. The PC film solution ensures a durable haptic touch surface on high-use, high-wear printed electronics.
Contact expert Request a sample Request a quote
Task

Durable haptic touch surface material for IME components

DuraTech Industries is a worldwide supplier of high-quality custom label printing. The firm is now expanding into the commercial manufacturing of in-mold electronics (IME) components such as haptic touch control panels. This printed electronics technology must support effective, flexible human-machine interactions for DuraTech customers such as Watlow, a global supplier of industrial electric thermal solutions.  

High-use control panels with buttons, sliders, sensors, and other haptic touch controls all demand molded plastic surface materials that work well with printed electronics. Beyond just attractive design, IME parts must offer an extremely reliable and robust substrate, for a uniform surface with no cracks or crevices where dirt and bacteria can accumulate. Controller device surfaces must be able to integrate conductive inks, LEDs, antennas and other electronic components, especially in automotive applications. The surface material must of course be scratch resistant and retain good aesthetics under heavy and repeated use in industrial surroundings.

Challenge

Responsive IME haptic touch in a smooth, strong surface

DuraTech’s customer Watlow was creating a new industrial temperature controller, the Watlow PM Plus™, replacing a legacy rubber button interface with a smooth haptic touch keypad. The new IME printed electronics interface had to couple simpler controls with simpler manufacturing, replacing cables with capacitive and conductive surfaces and inks. 

In order to enhance the user experience, the challenge here was to deliver both responsive IME haptics and robust protection in the new temperature controller’s surface material. Any consumer and industrial appliance made from a plastic mold must stand up to repeated use, scratching and handling, but at the same time, its responsive IME surface must also conceal any ribs, or sink marks from parts inserted beneath it. In search of a material solution for the Watlow PM Plus™ that would meet all these criteria, DuraTech turned to Covestro, who was able to offer the scratch resistant Makrofol SR906 PC Film as a suitable solution.

The PM Plus™ heat controller reduces the complexity of the front controls while eliminating dependence on cables and simplifying production. Makrofol® SR906 7-2 Film enabled DuraTech to configure a product for Watlow that offers an industry-leading user experience.

Paul Hatlem

Sales Manager, DuraTech

Solution

Makrofol® SR906 7-2 Film: engineered for in-mold electronics

We developed Makrofol® R906 7-2 Polycarbonate Film specifically with in-mold electronics (IME) technology in mind. Its key innovation is a protective layer of flexible acrylic, which adds high scratch and chemical resistance and good aesthetics to the high processability of PC Films. It joins our wider range of durable Makrofol® PC Films which all offer tough, versatile surfaces that unite great formability and printability with high heat resistance over a wide temperature range.

Makrofol® SR906 7-2 features a velvet matte IME surface texture that enabled DuraTech to deliver an industry-leading user experience for the Watlow PM Plus™ heat controller. Fingers can smoothly slide across the UV resistant surface without sticking, as if it were glossy. The texture also hides sink marks, while the reverse surface of fine matte ensures printability. 

The acrylic layer delivers chemical resistance to the cleaning agents used in industrial environments, while also withstanding scratching. At the same time, the IME-optimized film for printed electronics allows for lighter weight and reduced plastic part size, reducing the space and materials needed, with a corresponding reduction in CO₂. Our team of specialists is available to help tune Makrofol® R906 7-2 Film for your printed electronics application.

* Watlow PM Plus™ is a registered trademark of Watlow Electric Manufacturing Company and is used by Covestro with permission.

We formulated Makrofol® SR906 7-2 Film specifically to meet an unmet need in the market. This textured film offers excellent graphics and a smooth touch surface, while hiding sink marks on the A surface. Printing electronics on our Makrofol® Film allows the part’s weight and size to be reduced.

Robin Robinson

Covestro Consumer & Industrial Solutions, Covestro

Key Benefits

  • Responsive haptics: Makrofol® R906 7-2 PC Film unites a good haptic response with a glossy feel.
  • Durable and flexible: A layer of protective acrylic enhances the flexible strength of polycarbonate.
  • Chemical resistance: A surface of Makrofol® SR906 7-2 stands up to chemicals and industrial cleaners.
  • Printing friendly A reverse surface of fine matte polycarbonate enhances the film’s printability
  • Smooth: The acrylic velvet matte textured UV resistant surface also hides sink marks.

Download

Film selector guide for Polycarbonate based Films - only USA | Bayfol®, Makrofol®

PC film optimized for IME applications

Contact our team for samples or more information on IME-optimized Makrofol® SR906 7-2 PC film.

Find out more

Contact us

How would you describe yourself?

What type of material are you interested in?

What type of industry are you interested in?

What type of inquiry is this?

How can we contact you?

* Mandatory Fields

{"FieldName":"","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispcm/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&max=5&lang=en&extended=true","Language":"en","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":10}
Request a sample
formVersion
{"FieldName":"productName","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispcm/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&max=5&lang=en&extended=true","Language":"en","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":10}

Request a sample

Hello! Thanks for reaching out to us.
We have received your request and one of our experts will be in touch with you as soon as possible.
In the meantime, feel free to discover our innovative material solutions!

Speak to you soon,
Your Covestro Team

Request a quote
formVersion
{"FieldName":"productName","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispcm/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&max=5&lang=en&extended=true","Language":"en","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":10}

Request a quote

Hello! Thanks for reaching out to us.
We have received your request and one of our experts will be in touch with you as soon as possible.
In the meantime, feel free to discover our innovative material solutions!

Speak to you soon,
Your Covestro Team

Compare