Impranil® DL 1618
Anionic aliphatic polyester-polyurethane dispersion. Impranil® DL 1618 is part of the INSQIN® toolbox for inkjet printing. Its property profile makes it especially suitable for heat transfer printing for the following application areas - fashion - technical articles
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Anionic aliphatic polyester-polyurethane dispersion.
Impranil® DL 1618 is part of the INSQIN® toolbox for inkjet printing. Its property profile makes it especially suitable for heat transfer printing for the following application areas
- fashion
- technical articles
Impranil® DL 1618 is part of the INSQIN® toolbox for inkjet printing. Its property profile makes it especially suitable for heat transfer printing for the following application areas
- fashion
- technical articles
Storage Conditions
Storage in original sealed Covestro container.
- Recommended storage temperature: 5 - 30 °C.
- Protect from frost, heat and foreign material.
General information: The product cannot be used if it has been frozen. Thecontainers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to max. 50 °C has no adverse effect on product properties.
- Recommended storage temperature: 5 - 30 °C.
- Protect from frost, heat and foreign material.
General information: The product cannot be used if it has been frozen. Thecontainers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to max. 50 °C has no adverse effect on product properties.
Sampling
No data available
Packaging Type
210 kg drum, 1,000 kg container
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Tg | Differential Scanning Calorimetry | °C | - 4 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viskosity at 23°C spindle L2/30 rpm | DIN EN ISO 2555 | mPa·s | < 250 |
| pH-value | DIN ISO 976 | 6 - 8 | |
| Mean particle size | Laser correlation spectroscopy | nm | < 300 |
| Non-volatile content(0.9-1.1g / 1h / 125°C) | DIN EN ISO 3251 | % | 48 - 52 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
