- Plastics
Makrolon® M402 LF
polycarbonate; MVR (300 °C/1.2 kg) 19 cm³/10 min; low viscosity; improved friction characteristics; biocompatible according to many ISO 10993-1 test requirements; suitable for medical devices
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Plastics
- Medical
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
スクリュー回転数 | - | m/s | 0.05 - 0.2 | |
バレル温度‐ノズル | - | °C | 270 - 305 | |
バレル温度‐中部 | - | °C | 270 - 290 | |
バレル温度‐前部 | - | °C | 285 - 305 | |
バレル温度‐後部 | - | °C | 250 - 270 | |
ベント深さ | - | mm | 0.025 - 0.075 | |
乾燥時間(除湿乾燥機) | - | h | 4 | |
乾燥温度(除湿乾燥機) | - | °C | 120 | |
保圧(最大射出圧比) | - | % | 50 - 75 | |
最大含水率 | - | % | <=0.02 | |
最適射出量 (最大射出量比) | - | % | 30 - 70 | |
標準樹脂温度 | - | °C | 300 | |
樹脂温度 | - | °C | 280 - 320 | |
背圧 | - | bar | 100 - 200 | |
金型温度 | - | °C | 70 - 110 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
ビカット軟化温度 | ISO 306 | 50 N; 120 °C/h | °C | 144 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
ノッチ付き アイゾット衝撃強度 | ISO 21305/based on ISO 180/A | 23 °C/ 3 mm | kJ/m² | 60 |
引張り弾性率 | ISO 527-1,-2 | 1 mm/min | MPa | 2150 |
引張り破断伸び率 | ISO 527-1,-2 | 50 mm/min | % | >50 |
引張り降伏応力 | ISO 527-1,-2 | 50 mm/min | MPa | 60 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
MVR | ISO 1133 | 300 °C/ 1.2 kg | cm³/10 min | 19 |
成形収縮率、垂直方向 | ISO 294-4 | 60x60x2 mm³ | % | 0.7 |
成形収縮率、流動方向 | ISO 294-4 | 60x60x2 mm³ | % | 0.7 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
密度 | ISO 1183-1 | kg/m³ | 1200 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com