- Plastics
Bayblend® M301 FR
(PC+ABS)-Blend; Vicat/B 120 = 105°C; suitable for use in electrical and electronic devices; Manufactured according to GMP; tested only according to ISO 10993-5 and ISO 10993-10 for contact with uncompromised skin only; for questions regarding biocompatibility we ask for an email inquiry under plastics@covestro.com
i
Market Switch
Selection will influence the results you get.
About
Product Types
- PC+ABS blend
Material
- Plastics
- Medical, Impact resistant
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| スクリュー回転数 | - | m/s | 0.05 - 0.2 | |
| バレル温度‐ノズル | - | °C | 255 - 265 | |
| バレル温度‐中部 | - | °C | 225 - 235 | |
| バレル温度‐前部 | - | °C | 230 - 240 | |
| バレル温度‐後部 | - | °C | 220 - 230 | |
| ベント深さ | - | mm | 0.025 - 0.075 | |
| 乾燥時間（除湿乾燥機） | - | h | 4 | |
| 乾燥温度（除湿乾燥機） | - | °C | 80 | |
| 保圧（最大射出圧比） | - | % | 50 - 75 | |
| 最大含水率 | - | % | <= 0,02 | |
| 最適射出量 (最大射出量比) | - | % | 30 - 70 | |
| 標準樹脂温度 | - | °C | 260 | |
| 樹脂温度 | - | °C | 240 - 270 | |
| 背圧 | - | bar | 50 - 150 | |
| 金型温度 | - | °C | 60 - 90 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Coefficient of linear thermal expansion, normal | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.8 |
| ビカット軟化温度 | ISO 306 | 50 N; 120 °C/h | °C | 105 |
| 燃焼性UL94 [] | UL 94 | 2.0 mm | Class | 5VB |
| 燃焼性UL94(1.5mm) [] | UL 94 | Class | V-0 | |
| 燃焼性UL94-5V [] | UL 94 | 3.0 mm | Class | 5VA |
| 線膨張係数、流動方向 | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.76 |
| 荷重たわみ温度 | ISO 75-1,-2 | 0.45 MPa | °C | 95 |
| 荷重たわみ温度 | ISO 75-1,-2 | 1.80 MPa | °C | 85 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| アイゾット衝撃強度 | ISO 180/U | 23 °C | kJ/m² | N |
| ノッチ付き アイゾット衝撃強度 | ISO 180/A | 23 °C | kJ/m² | 35 |
| 引張り弾性率 | ISO 527-1,-2 | 1 mm/min | MPa | 2600 |
| 引張り破断伸び率 | b.o. ISO 527-1,-2 | 50 mm/min | % | > 30 |
| 引張り破断強度 | ISO 527-1,-2 | 50 mm/min | MPa | 50 |
| 引張り降伏伸び率 | ISO 527-1,-2 | 50 mm/min | % | 4 |
| 引張り降伏応力 | ISO 527-1,-2 | 50 mm/min | MPa | 60 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| MVR | ISO 1133 | 240 °C/ 5 kg | cm³/10 min | 25 |
| 成形収縮率、垂直方向 | b.o. ISO 2577 | 150x105x3 mm³/ 240 °C / MT 80 °C | % | 0.5 - 0.7 |
| 成形収縮率、流動方向 | b.o. ISO 2577 | 150x105x3 mm³/ 240 °C / MT 80 °C | % | 0.5 - 0.7 |
| 溶融粘度 | b.o. ISO 11443-A | 1000 s^-1^/ 260 °C | Pa*s | 170 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 体積抵抗率 | IEC 62631-3-1 | Ohm*m | 1.0 E+14 | |
| 比誘電率 | IEC 60250 | 1 MHz | 3.1 | |
| 比誘電率 | IEC 60250 | 100 Hz | 3.2 | |
| 絶縁破壊強度 | IEC 60243-1 | 1 mm | kV/mm | 30 |
| 表面抵抗率 | IEC 62631-3-2 | Ohm | 1.0 E+16 | |
| 誘電正接 | IEC 60250 | 1 MHz | 10^-4^ | 70 |
| 誘電正接 | IEC 60250 | 100 Hz | 10^-4^ | 50 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 射出成形-射出速度 | ISO 294 | mm/s | 240 | |
| 射出成形-溶融温度 | ISO 294 | °C | 240 | |
| 射出成形-金型温度 | ISO 294 | °C | 80 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 吸水率 （平衡) | ISO 62 | 23 °C; 50 % r. h. | % | 0.2 |
| 吸水率 （飽和) | ISO 62 | Water at 23 °C | % | 0.5 |
| 密度 | ISO 1183-1 | kg/m³ | 1190 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
