Prism® CM-200

solid polyurethane system used in the RIM process;tensile strength at break 7,000 lb/in²; flexural modulus 290,000 lb/in²

Contact an Expert
Market Switch
Selection will influence the results you get.
Copied to clipboard


Product Types

  • Non-reactive system


No data available

General Characterization

Prism CM-200 solid polyurethane system is used in the reaction injection molding (RIM) process.

Storage Conditions

Isocyanate Component – Component A (MDI isocyanate) must be stored in tightly closed containers and protected from contamination with moisture and foreign materials, which can adversely affect processing. It will react slowly with water to form ureas and liberate carbon dioxide gas, which may cause sealed containers to expand and rupture. Storage temperature should be maintained between 24°C and 30°C (75°F and 86°F).
Polyol Component – Component B (polyol) is hygroscopic and must be kept in tightly closed containers to prevent contamination with moisture and foreign materials, which can adversely affect processing. Storage temperatures should be maintained between 5°C and 37°C (40°F and 100°F). This polyol system will separate into phases without agitation. Therefore, it is important to mix it thoroughly prior to and during its use.
Some of the end-uses of the products described in this bulletin must comply with applicable regulations, such as FDA, NSF, USDA and CPSC. If you have questions on the regulatory status of this product, contact your Covestro representative or Regulatory Manager in Pittsburgh, PA.


No data available

Packaging Type

No data available


Technical Data Sheet
Safety Data Sheet
No direct download available, please visit

Do you want to know more about Prism® CM-200?
Get in touch with our experts!

Contact form image Zoe

How can we contact you?

* Mandatory Fields

1 product to compare