- Plastics
Makrolon® M430 GF
polycarbonate; MVR (300 °C/1.2 kg) 7.0 cm³/10 min; low viscosity; 30 % glass fiber reinforced; biocompatible according to many ISO 10993-1 test requirements; suitable for medical devices
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Plastics
- Medical, Dimensionally stable
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
Dry Air Drying Temperature | - | °C | 120 | |
Dry Air Drying Time | - | h | 4 | |
Mold Temperatures | - | °C | 100 | |
Standard Melt temperature | - | °C | 300 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
Coefficient of linear thermal expansion, normal | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.4 |
Coefficient of linear thermal expansion, parallel | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.2 |
Temperature of deflection under load | ISO 75-1,-2 | 0.45 MPa | °C | 144 |
Temperature of deflection under load | ISO 75-1,-2 | 1.80 MPa | °C | 140 |
Vicat softening temperature | ISO 306 | 50 N; 120 °C/h | °C | 149 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
Flexural modulus | ISO 178 | 2 mm/min | MPa | 8100 |
Flexural strength | ISO 178 | 2 mm/min | MPa | 197 |
Izod notched impact strength | ISO 21305/based on ISO 180/A | 23 °C/ 3 mm | kJ/m² | 14 |
Izod notched impact strength | ISO 21305/based on ISO 180/A | -30 °C/ 3 mm | kJ/m² | 13 |
Strain at break | ISO 527-1,-2 | 5 mm/min | % | 2.8 |
Stress at break | ISO 527-1,-2 | 5 mm/min | MPa | 128 |
Tensile modulus | ISO 527-1,-2 | 1 mm/min | MPa | 8000 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
Melt viscosity | b.o. ISO 11443-A | 1000 s^-1^/ 300 °C | Pa*s | 380 |
Melt volume-flow rate | ISO 1133 | 300 °C/ 1.2 kg | cm³/10 min | 7 |
Molding shrinkage, normal | ISO 294-4 | 60x60x2 mm³ | % | 0.5 |
Molding shrinkage, parallel | ISO 294-4 | 60x60x2 mm³ | % | 0.2 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
Density | ISO 1183-1 | kg/m³ | 1420 | |
Water absorption (equilibrium value) | ISO 62 | 23 °C; 50 % r. h. | % | 0.1 |
Water absorption (saturation value) | ISO 62 | Water at 23 °C | % | 0.26 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com