Submit
  • Plastics

Makrolon® 1095

MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 15 % glass fiber reinforced; UL 94V-0/3.0 mm; high viscosity; easy release; housings for power tools

Contact expert Request a sample Request a quote
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

  • Polycarbonate

Material

Plastics
Transparent

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Barrel Temperatures - Front - °C 300 - 310
Barrel Temperatures - Middle - °C 280 - 290
Barrel Temperatures - Nozzle - °C 310 - 320
Barrel Temperatures - Rear - °C 260 - 270
Dry Air Drying Temperature - °C 120
Dry Air Drying Time - h 2 - 3
Hold Pressure (% of injection pressure) - % 50 - 75
Melt temperatures - °C 310 - 330
Moisture Content max. (%) - % <= 0,02
Mold Temperatures - °C 80 - 130
Peripheral Screw Speed - m/s 0.05 - 0.2
Plastic Back Pressure (specific) - bar 50 - 150
Shot-to-Cylinder Size - % 30 - 70
Standard Melt temperature - °C 320
Vent Depth - mm 0.025 - 0.075
Property Name Standard Test condition Unit Value
Burning behavior UL 94 (1.5 mm) [UL recognition] UL 94 1.5 mm Class V-2
Burning behavior UL 94 [UL recognition] UL 94 3.0 mm Class V-0
Burning rate (US-FMVSS) ISO 3795 >=1.0 mm mm/min passed
Coefficient of linear thermal expansion, normal ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.65
Coefficient of linear thermal expansion, parallel ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.35
Flash ignition temperature ASTM D1929 °C 470
Glow wire test (GWFI) IEC 60695-2-12 0.75 mm °C 850
Glow wire test (GWFI) IEC 60695-2-12 1.5 mm °C 960
Glow wire test (GWFI) IEC 60695-2-12 3.0 mm °C 960
Glow wire test (GWIT) IEC 60695-2-13 0.75 mm °C 850
Glow wire test (GWIT) IEC 60695-2-13 1.5 mm °C 900
Glow wire test (GWIT) IEC 60695-2-13 3.0 mm °C 900
Needle flame test IEC 60695-11-5 Method F/ 1.5 mm s 120
Needle flame test IEC 60695-11-5 Method F/ 2.0 mm s 120
Needle flame test IEC 60695-11-5 Method F/ 3.0 mm s 120
Needle flame test IEC 60695-11-5 Method K/ 3.0 mm s 120
Needle flame test IEC 60695-11-5 Method K/ 1.5 mm s 60
Needle flame test IEC 60695-11-5 Method K/ 2.0 mm s 60
Oxygen index ISO 4589-2 Method A % 27
Relative temperature index (Electric strength) [UL recognition] UL 746B 1.5 mm °C 80
Relative temperature index (Tensile impact strength) [UL recognition] UL 746B 1.5 mm °C 80
Relative temperature index (Tensile strength) [UL recognition] UL 746B 1.5 mm °C 80
Resistance to heat (ball pressure test) IEC 60695-10-2 °C 136
Self ignition temperature ASTM D1929 °C 550
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 141
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 135
Vicat softening temperature ISO 306 50 N; 120 °C/h °C 145
Vicat softening temperature ISO 306 50 N; 50 °C/h °C 142
Property Name Standard Test condition Unit Value
Ball indentation hardness ISO 2039-1 N/mm² 129
Charpy impact strength ISO 179/1eU -30 °C kJ/m² 100C
Charpy impact strength ISO 179/1eU -60 °C kJ/m² 90C
Charpy impact strength ISO 179/1eU 23 °C kJ/m² 120C
Charpy notched impact strength ISO 21305/based on ISO 179/1eA 23 °C/ 3 mm kJ/m² 10C
Flexural modulus ISO 178 2 mm/min MPa 4400
Flexural strain at flexural strength ISO 178 2 mm/min % 5.8
Flexural strength ISO 178 2 mm/min MPa 105
Flexural stress at 3.5 % strain ISO 178 2 mm/min MPa 95
Izod notched impact strength ISO 21305/based on ISO 180/A 23 °C/ 3 mm kJ/m² 10C
Puncture energy ISO 6603-2 -30 °C J 13
Puncture energy ISO 6603-2 23 °C J 25
Puncture impact properties - maximum force ISO 6603-2 -30 °C N 3000
Puncture impact properties - maximum force ISO 6603-2 23 °C N 3600
Strain at break ISO 527-1,-2 5 mm/min % 12
Stress at break ISO 527-1,-2 5 mm/min MPa 45
Tensile modulus ISO 527-1,-2 1 mm/min MPa 4600
Yield strain ISO 527-1,-2 5 mm/min % 4.6
Yield stress ISO 527-1,-2 5 mm/min MPa 64
Property Name Standard Test condition Unit Value
Melt mass-flow rate ISO 1133 300 °C/ 1.2 kg g/10 min 7
Melt volume-flow rate ISO 1133 300 °C/ 1.2 kg cm³/10 min 6
Molding shrinkage, normal ISO 294-4 60x60x2 mm³/ 500 bar % 0.45
Molding shrinkage, parallel ISO 294-4 60x60x2 mm³/ 500 bar % 0.45
Property Name Standard Test condition Unit Value
Comparative tracking index CTI IEC 60112 Solution A Rating 175
Comparative tracking index CTI M IEC 60112 Solution B Rating 125M
Dissipation factor IEC 60250 1 MHz 10^-4^ 90
Dissipation factor IEC 60250 100 Hz 10^-4^ 10
Electrical strength IEC 60243-1 1 mm kV/mm 38
Electrolytic corrosion IEC 60426 Rating A1
Relative permittivity IEC 60250 1 MHz 3.2
Relative permittivity IEC 60250 100 Hz 3.2
Surface resistivity IEC 62631-3-2 Ohm 1E16
Volume resistivity IEC 62631-3-1 Ohm*m 1E14
Property Name Standard Test condition Unit Value
Injection molding - Injection velocity ISO 294 mm/s 200
Injection molding - Melt temperature ISO 294 °C 300
Injection molding - Mold temperature ISO 294 °C 110
Property Name Standard Test condition Unit Value
Bulk density ISO 60 Pellets kg/m³ 640
Density ISO 1183-1 kg/m³ 1290
Glass fiber content b.o. ISO 3451-1 Method A % 15
Water absorption (equilibrium value) ISO 62 23 °C; 50 % r. h. % 0.1
Water absorption (saturation value) ISO 62 Water at 23 °C % 0.24

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Viscosity Shear Rate Makrolon® 1095 (Multipoint Data Sheet) Viskosität Schergeschwindigkeit Makrolon® 1095 (Multipoint Data Sheet)
Secant modulus - Strain Makrolon® 1095 (Multipoint Data Sheet) Sekantenmodul-Dehnung Makrolon® 1095 (Multipoint Data Sheet)
Stress-Strain Makrolon® 1095 (Multipoint Data Sheet) Spannung-Dehnung Makrolon® 1095 (Multipoint Data Sheet)

Do you want to know more about Makrolon® 1095?
Get in touch with our experts!

How would you describe yourself?

What type of material are you interested in?

What type of industry are you interested in?

What type of inquiry is this?

How can we contact you?

* Mandatory Fields

{"FieldName":"","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispcm/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&max=5&lang=en&extended=true","Language":"en","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":10}
Request a sample
formVersion
{"FieldName":"productName","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispcm/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&max=5&lang=en&extended=true","Language":"en","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":10}

Request a sample

Hello! Thanks for reaching out to us.
We have received your request and one of our experts will be in touch with you as soon as possible.
In the meantime, feel free to discover our innovative material solutions!

Speak to you soon,
Your Covestro Team

Request a quote
formVersion
{"FieldName":"productName","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispcm/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&max=5&lang=en&extended=true","Language":"en","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":10}

Request a quote

Hello! Thanks for reaching out to us.
We have received your request and one of our experts will be in touch with you as soon as possible.
In the meantime, feel free to discover our innovative material solutions!

Speak to you soon,
Your Covestro Team

Compare