Impraperm® DL 5310/1
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 5 - 30 °C.
- Protect from frost, heat and foreign material.
General information: The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to max. 50 °C has no adverse effect on product properties.
Before application, the product should be filtered to remove any polymer particles which may be formed due to high temperature during product transportation and storage.
- Recommended storage temperature: 5 - 30 °C.
- Protect from frost, heat and foreign material.
General information: The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to max. 50 °C has no adverse effect on product properties.
Before application, the product should be filtered to remove any polymer particles which may be formed due to high temperature during product transportation and storage.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 23 °C, | DIN EN ISO 3219/A.3 | mPa*s | < 1000 |
| Non-volatile content (0,9 - 1,1 g / 1 h / 125 °C, convection oven) | DIN EN ISO 3215 | % | 29 - 31 |
| pH-value | DIN ISO 976 | 6 - 8 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density 23℃ | DIN EN ISO 2811/3 | g/cm^3 | approx. 1.1 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
