Impranil® DL 1618
Anionic aliphatic polyester-polyurethane dispersion. Impranil® DL 1618 is part of the INSQIN® toolbox for inkjet printing. Its property profile makes it especially suitable for heat transfer printing for the following application areas - fashion - technical articles
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Impranil DL 1618 is an anionic polyester-polyurethane dispersion. It is suitable for use in inkjet printing and heat transfer printing applications. Application areas include:
• Fashion
• Technical articles
• Fashion
• Technical articles
Storage Conditions
Impranil DL 1618 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to maximum 50°C has no adverse effect on product properties. Recommended storage temperature is 5ºC-30ºC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Tg | °C | -4 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Non-volatile content (0.9-1.1 g / 1 h / 125^oC) | % | 48 - 52 | |
| Mean particle size | nm | < 300 | |
| pH value | 6 - 8 | ||
| Viscosity at 23ºC(spindle L2/30 rpm ) | mPa*s | < 250 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
