Impranil® DL 1545
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Impranil® DL 1545 has excellent bonding properties on many synthetic and natural materials. For heat activation bonding application with Impranil® DL 1545, a bond line temperature in the range of 80-100°C or even higher is recommended to allow the dried adhesive to be fully activated for bongding. The actual temperature needed for specific application will depend on the time in press, the pressure applied and the substrates being bonded
Storage Conditions
- Storage in original Covestro container.
- Recommended storage temperature: 10 - 23 °C. Temperatures higher than 30 °C should be avoided.
- Protect from frost, heat and foreign material.
General information: The product cannot be used if it has been frozen. Freezing can damage the product irreversibly. Prolonged storage at higher temperature may affect the product properties and possibly resulting in sedimentation or coagulation. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film.
- Recommended storage temperature: 10 - 23 °C. Temperatures higher than 30 °C should be avoided.
- Protect from frost, heat and foreign material.
General information: The product cannot be used if it has been frozen. Freezing can damage the product irreversibly. Prolonged storage at higher temperature may affect the product properties and possibly resulting in sedimentation or coagulation. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Minimum film-forming temperature (MFT) film forming | DIN ISO 2115 | °C | approx. 5 |
Density at 20ºC | DIN EN ISO 2811/3 | g/cm3 | ca. 1,1 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
pH value | DIN ISO 976 | 6,0 - 9.0 | |
Viscosity at 23°C spindle L2/30 rpm | DIN EN ISO 3219 | mPa*s | ≤ 1,000 |
Non-volatile content (0.9-1.1g / 1 h / 125 °C) | DIN EN ISO 3251 | % | 44 - 46 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com