Desmophen® 1915 N - for flexible slabstock foams
DESMOPHEN 1915 N is an inactive trifunctional polyether modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx. 15% by weight. It is specifically designed for the production of conventional flexible slabstock foams with enhanced loadbearing properties. It exhibits a broad processing range and allows the use of most commercially available silicone surfactants and tertiary amine catalysts.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
DESMOPHEN 1915 N is an inactive trifunctional polyether modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx. 15% by weight. It is specifically designed for the production of conventional flexible slabstock foams with enhanced loadbearing properties. It exhibits a broad processing range and allows the use of most commercially available silicone surfactants and tertiary amine catalysts.
Storage Conditions
Recommended storage temperature (°C): 10 - 35.
Product must be stored in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately.
The lapse of this period does not necessarily mean that the product no
longer meets specifications. However, prior to using said product, Covestro
recommends to test such a product if it still meets the specifications. Covestro
does not make any representation regarding the product after the period and
Covestro shall not be responsible or liable in any way for the product failing to
meet specifications after the period.
Product must be stored in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately.
The lapse of this period does not necessarily mean that the product no
longer meets specifications. However, prior to using said product, Covestro
recommends to test such a product if it still meets the specifications. Covestro
does not make any representation regarding the product after the period and
Covestro shall not be responsible or liable in any way for the product failing to
meet specifications after the period.
Sampling
Moisture access must be prevented when taking product samples.
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Density 20 °C | DIN 51757 | g/cm³ | 1.023 |
Appearance | PET-03-04 | opaque white liquid | |
TDI basic value | pbw Desmodur® T on100 pbw DESMOPHEN® 1915 N | 6.3 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Hydroxyl number | PET-11-01 | mg KOH/g | 38.3 - 43.3 |
Viscosity 25 °C | PET-10-01 | mPa*s | 700 - 1000 |
Water content | PET-19-01 | % by wt. | ≤ 0.10 |
Hydroxyl number | PET-11-01 | mg KOH/g | 38.3 - 43.3 |
Viscosity 25 °C | PET-10-01 | mPa*s | 700 - 1000 |
Water content | PET-19-01 | % by wt. | ≤ 0.10 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com