Desmodur® VP.PU 3230 - for flexible moulded foams
i
Market Switch
Selection will influence the results you get.
About
Product Types
- MDI
Material
No data available
General Characterization
Desmodur® VP.PU 3230 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and homologues of higher functionality used for the production of the flexible polyurethane cold-curing HR molded foam for automotive seating.
Storage Conditions
Recommended storage temperature (°C): 20 - 40
The product must be stored in sealed, moisture-tight containers. Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Lengthy storage leads to an increase in the viscosity of Desmodur® VP.PU 3230, although in our experience this has no adverse effect on the processing.
Covestro represents that, for a period of 6 months following the day of shipment as stated in the respective delivery documents, the product will meet the values set forth in section "specification" above provided that the product is stored in full compliance with the storage conditions and is otherwise handled appropriately. The lapse of this period does not necessarily mean that the product no longer meets specifications. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications. Covestro does not make any representation regarding the product after the period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications after the period.
The product must be stored in sealed, moisture-tight containers. Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Lengthy storage leads to an increase in the viscosity of Desmodur® VP.PU 3230, although in our experience this has no adverse effect on the processing.
Covestro represents that, for a period of 6 months following the day of shipment as stated in the respective delivery documents, the product will meet the values set forth in section "specification" above provided that the product is stored in full compliance with the storage conditions and is otherwise handled appropriately. The lapse of this period does not necessarily mean that the product no longer meets specifications. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications. Covestro does not make any representation regarding the product after the period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications after the period.
Sampling
Moisture access must be prevented when taking product samples.
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Appearance | DIN ISO 6271 | brownish black liquid | |
| Density 25 °C | DIN 51757 | g/cm³ | approx. 1.21 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Acidity | MDI-01-03 | ppm | ≤ 150 |
| NCO content | MDI-01-01 | % by wt. | 32.0 - 33.0 |
| Viscosity 25 °C | MDI-01-02 | mPa*s | 15 - 35 |
| Acidity | MDI-01-03 | ppm | ≤ 150 |
| NCO content | MDI-01-01 | % by wt. | 32.0 - 33.0 |
| Viscosity 25 °C | MDI-01-02 | mPa*s | 15 - 35 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
