Desmodur® T 65 N - for flexible foams

Contact an Expert
Market Switch
Selection will influence the results you get.
Copied to clipboard


Product Types

  • TDI


No data available

General Characterization

Desmodur® T 65 N is a mixture of 2,4-toluene diisocyanate [A] and 2,6-toluene diisocyanate [B]. Desmodur® T 65 N is used for the production of polyurethanes.

Storage Conditions

- Storage in original sealed container.
- Recommended storage temperature: 18 - 40°C.
- Protect from moisture, heat and foreign material.
General information:
The product is sensitive to moisture and heat. It should be protected against contact with atmospheric moisture. Higher storage temperatures for prolonged periods may result in discoloration or the formation of insoluble deposits. The product crystallizes at temperatures below 18°C. However, careful melting at up to 50°C will reliquify the product without any detrimental effect on its quality. The contact surface temperature may not exceed 80°C. The reliquified product must be homogenized as crystallisation causes a shift in the isomer ratio between the crystalline and the still liquid phases.
Opened containers must be resealed after removing product. If stored for long periods, the product should be overlaid with nitrogen. The product reacts with water to release carbon dioxide. During storage, transfer and handling of the product, contact with water in any form (damp containers, solvents containing water, moist air) must be prevented as the generation of carbon dioxide may result in a dangerous increase in pressure. The polyureas which are formed at the same time may result in turbidity. They may also cause blockages and breakdowns in filters, pumps and pipes.
Storage time:
We represents that, for a period of twelve months following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section "specifications or characteristic data" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section "storage" above and is otherwise handled appropriately.
The lapse of the twelve months period does not necessarily mean that the ... text to long! (max 2000 characters)


The access of moisture in any form must be prevented.

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Test Method Unit Value
Density 25 °C DIN 51757 g/cm³ approx. 1.22
Flash point DIN 51758 °C 127
Appearance DIN ISO 6271 Colourless to pale liquid
Freezing point DIN 53175 °C approx. 5
NCO content DIN 53185 % by wt. min. 48
Viscosity 25 °C DIN 53015 mPa*s approx. 3

Property Name Test Method Unit Value
Hydrolysable chlorine TDI-01-03 mg/kg ≤ 100
Acidity TDI-01-02 mg/kg ≤ 40
2,4-isomer content TDI-01-04 % by wt. 66 - 68
Purity TDI-01-01 % by wt. ≥ 99.5
Hydrolysable chlorine TDI-01-03 mg/kg ≤ 100
Purity TDI-01-01 % by wt. ≥ 99.5
2,4-isomer content TDI-01-04 % by wt. 66 - 68
Acidity TDI-01-02 mg/kg ≤ 40


Technical Data Sheet
Safety Data Sheet
No direct download available, please visit

Related topics

Do you want to know more about Desmodur® T 65 N - for flexible foams?
Get in touch with our experts!

Contact form image Zoe

How can we contact you?

* Mandatory Fields