Desmodur® MP-101
Desmodur MP-101 is a diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polypropylene ether glycol (PPG).
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Desmodur MP-101 is a diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polypropylene ether glycol (PPG).
Storage Conditions
Desmodur MP-101 should be stored in tightly sealed original containers and protected from moisture, heat, and foreign materials. Recommended storage temperature is 15º-35ºC.
It will react slowly with water to form ureas and CO2 gas, which may cause sealed containers to expand and rupture. Partially filled containers should be blanketed with dry nitrogen.
Desmodur MP-101 prepolymer must not be allowed to freeze. Exposure to temperatures less than 15°C, even for short periods of time, can result in the formation of solid material. Prolonged storage of solid or partially solid Desmodur MP-101 prepolymer may result in the formation of MDI dimer in amounts which exceed its solubility in the prepolymer at normal storage temperatures. This can make the product unusable.
If solids should form because of exposure of Desmodur MP-101 prepolymer to lower temperatures, it may be possible to reliquify the product by reheating. Use a well-ventilated oven for the minimum time necessary to render it clear. The temperature of the product should not exceed 60°C. Agitation or drum rollers are recommended to avoid excessive local heating, which will degrade the prepolymer.
Significant amounts of MDI dimer may form during the heating process. As a result, the remelted prepolymer may be cloudy, and the processing behavior and properties of the final product may be affected.
It will react slowly with water to form ureas and CO2 gas, which may cause sealed containers to expand and rupture. Partially filled containers should be blanketed with dry nitrogen.
Desmodur MP-101 prepolymer must not be allowed to freeze. Exposure to temperatures less than 15°C, even for short periods of time, can result in the formation of solid material. Prolonged storage of solid or partially solid Desmodur MP-101 prepolymer may result in the formation of MDI dimer in amounts which exceed its solubility in the prepolymer at normal storage temperatures. This can make the product unusable.
If solids should form because of exposure of Desmodur MP-101 prepolymer to lower temperatures, it may be possible to reliquify the product by reheating. Use a well-ventilated oven for the minimum time necessary to render it clear. The temperature of the product should not exceed 60°C. Agitation or drum rollers are recommended to avoid excessive local heating, which will degrade the prepolymer.
Significant amounts of MDI dimer may form during the heating process. As a result, the remelted prepolymer may be cloudy, and the processing behavior and properties of the final product may be affected.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Flash point PMCC | °C | 216 | |
Density at 25^oC | lb/gal | 9.1 | |
Specific gravity at 25^oC | 1.09 | ||
Appearance | Yellow, viscous liquid |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
NCO content | % | 9.65 - 10.24 | |
Viscosity at 25^oC | mPa∙s | 2000 - 3000 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com