Desmodur CQ L 75(C)
Aromatic polyisocyanate based on toluene diisocyanate.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Desmodur CQ L 75 (C) is an aromatic polyisocyanate based on toluene diisocyanate (TDI) using renewable feedstock attributed via mass-balance (ISCC PLUS certified).
It can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate two-component polyurethane coatings and adhesives.
It can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate two-component polyurethane coatings and adhesives.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Equivalent weight | approx. 315 | ||
| Renewable content | Attributed via mass-balance according to ISCC PLUS | % | approx. 30 |
| Density at 20 °C | DIN EN ISO 2811-3 | g/ml | approx. 1.17 |
| Flash point | DIN 51755 | °C | approx. 5 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity (23 °C) | M014-ISO 3219/A.3 | mPa*s | 1,600 ± 400 |
| NCO content | M105-ISO 11909 | % | 13.3 ± 0.4 |
| Color (Iodine) | M017-EN 1557 | ≤ 2 | |
| Monomer content | M106-ISO 10283 | % | < 0.5 |
| Non-volatile content | M020-ISO 3251 | % | 75.0 ± 2.0 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
