- Coatings, paints & inks
Desmodur® BL 3175 SN
Blocked aliphatic HDI-polyisocyanate. With Desmophen® grades to formulate lightfast one-component polyurethane stoving coatings; as an additive to improve flexibility and adhesion.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- PIC
- HDI
- Isocyanate
- Polyisocyanurate
- Aliphatic polyisocyanate
- Crosslinkers
- Polyisocyanate
- Hardeners
Material
- Coatings, paints & inks
- Elastic, Solventborne, Thermally resistant, Flexible
General Characterization
Blocked, aliphatic polyisocyanate based on HDI.
In combination with Desmophen® grades to formulate lightfast, one-component polyurethane stoving coatings; as an additive in conventional stoving systems to improve flexibility and adhesion.
In combination with Desmophen® grades to formulate lightfast, one-component polyurethane stoving coatings; as an additive in conventional stoving systems to improve flexibility and adhesion.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Equivalent weight | approx. 380 | ||
| Flash point | DIN 53 213/1 | °C | approx. 45 |
| Blocked NCO content | % | approx. 11.1 | |
| Density at 20 °C | DIN EN ISO 2811 | g/ml | approx. 1.06 |
| Viscosity at 25 °C | M014-ISO 3219/A.3 | mPa*s | approx. 2,800 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | 3,300 ± 400 |
| Color value (Hazen) | M017-EN 1557 | ≤ 60 | |
| Free NCO content, modified | M105-ISO 11909 | % | ≤ 0.2 |
| Non-volatile content (0.2 g / 60 min / 80 °C) | M020-ISO 3251 | % | 75 ± 2 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
