Bayhydur® 3100
Hydrophilic aliphatic HDI-polyisocyanat for waterborne 2-component polyurethane systems. Corresponds to the following sections of the U.S. FDA`s guidlines Title 21 CFR: Section 175.105 "Adhesives".
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Hydrophilic polyisocyanate
Material
No data available
General Characterization
Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).
As the hardener component for high-quality aqueous two-component polyurethane systems and as an additive to improve the property profile of aqueous coating and adhesive systems.
With respect to its composition, the product corresponds to the following sections of the U.S. FDA's guidlines "Title 21 CFR" : Section 175.105 "Adhesives".
As the hardener component for high-quality aqueous two-component polyurethane systems and as an additive to improve the property profile of aqueous coating and adhesive systems.
With respect to its composition, the product corresponds to the following sections of the U.S. FDA's guidlines "Title 21 CFR" : Section 175.105 "Adhesives".
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The access of water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead to dangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The access of water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead to dangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Flash point | DIN EN 22 719 | °C | > 250 |
| Viscosity at 25 °C | DIN EN ISO 3219/A.3 | mPa*s | approx. 2,500 |
| Equivalent weight | approx. 241 | ||
| Density at 20 °C | DIN EN ISO 2811 | g/ml | approx. 1.16 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| NCO content | DIN EN ISO 11 909 | % | 17.4 ± 0.5 |
| Color value (Hazen) | DIN EN 1557 | ≤ 60 | |
| Monomeric HDI | DIN EN ISO 10 283 | % | ≤ 0,15 |
| Viscosity at 23 °C | DIN EN ISO 3219/A.3 | mPa*s | 2,800 ± 800 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
