Bayflex® XGT-100

elastomeric polyurethane RIM system; gives equipment designers the flexibility to create large, complex parts that can be molded on existing injection machinery; density (unfilled) 64.9 lb/ft³; tensile strength at break (unfilled) 4,000 lb/in²; flexural modulus (unfilled) 100,000 lb/in² @ 23°C (73°F); notched izod impact strength (unfilled) 7.0 ft·lb/in

Contact expert Request a sample Request a quote
Market Switch
Selection will influence the results you get.
Copied to clipboard


Product Types

  • System


No data available

General Characterization

Bayflex XGT-100 is an elastomeric polyurethane system used in the reaction injection molding (RIM) process.

Storage Conditions

Isocyanate Component - Component A (MDI prepolymer isocyanate) must be stored in tightly closed containers and protected from contamination with moisture and other foreign substances, which can adversely affect processing. It will react slowly with water to form ureas and carbon dioxide gas, which may cause sealed containers to expand and rupture. Storage temperatures should be maintained between 24° and 30°C (75° and 86°F). Under these conditions, Component A will remain clear for periods of up to six months. Component A must not be allowed to freeze.
Exposure to temperatures less than 15°C (59°F), even for short periods of time, can result in the formation of solid material. During the winter months, appropriate precautions must be taken during shipment and storage.
Prolonged storage of solid or partially solid Component A may result in the formation of MDI dimer in amounts which exceed its solubility in the prepolymer at normal storage temperatures. This can make the product unusable.
If solids should form because of exposure of Component A to lower temperatures, it may be possible to reliquify the prepolymer by reheating. Use a well-ventilated oven for the minimum time necessary to render it clear. The temperature of the prepolymer should not exceed 60°C (140°F). Agitation or drum rollers are recommended to avoid excessive local heating, which will degrade the prepolymer. As a result, the remelted prepolymer may be cloudy, and the processing behavior and/or properties of the final product may be affected.
Polyol Component - Component B (polyol) is hygroscopic and may absorb water. Containers should be kept in tightly closed and protected from contamination with moisture and foreign materials which can adversely affect processing. Storage should be maintained at ambient temperatures. Note: Component B phase-separates upon standing and must be thoroughly mixed via mechanical means prior to use.


No data available

Packaging Type

No data available


Technical Data Sheet
Safety Data Sheet
No direct download available, please visit

Do you want to know more about Bayflex® XGT-100?
Get in touch with our experts!

How would you describe yourself?

What type of material are you interested in?

What type of inquiry is this?

How can we contact you?

* Mandatory Fields

Request a sample

Request a sample

sign up successful!

Request a quote

Request a quote

sign up successful!