Bayblend® FR3000 BBS300

(PC+ABS)-Blend; easy flowing; Vicat/B 120 temperature = 103 °C; UL recognition 94 V-0 at 1.5 mm; no juicing; good light stability

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

No data available

Material

No data available

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Barrel Temperatures - Front - °C 230 - 240
Barrel Temperatures - Middle - °C 225 - 235
Barrel Temperatures - Nozzle - °C 255 - 265
Barrel Temperatures - Rear - °C 220 - 230
Dry Air Drying Temperature - °C 80
Dry Air Drying Time - h 4
Hold Pressure (% of injection pressure) - % 50 - 75
Melt temperatures - °C 240 - 270
Moisture Content max. (%) - % <= 0,02
Mold Temperatures - °C 60 - 90
Peripheral Screw Speed - m/s 0.05 - 0.2
Plastic Back Pressure (specific) - bar 50 - 150
Shot-to-Cylinder Size - % 30 - 70
Standard Melt temperature - °C 260
Vent Depth - mm 0.025 - 0.075
Property Name Standard Test condition Unit Value
Burning behavior UL 94 (1.5 mm) UL 94 Class V-0
Burning behavior UL 94-5V UL 94 2.0 mm Class 5VB
Oxygen index ISO 4589-2 Method A % 34
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 95
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 85
Vicat softening temperature ISO 306 50 N; 120 °C/h °C 103
Property Name Standard Test condition Unit Value
Izod notched impact strength ISO 180/A 23 °C kJ/m² 30
Nominal strain at break ISO 527-1,-2 50 mm/min % 40
Tensile modulus ISO 527-1,-2 1 mm/min MPa 2650
Yield strain ISO 527-1,-2 50 mm/min % 3.9
Yield stress ISO 527-1,-2 50 mm/min MPa 64
Property Name Standard Test condition Unit Value
Melt viscosity b.o. ISO 11443-A 1000 s^-1^/ 240 °C Pa*s 150
Melt volume-flow rate ISO 1133 240 °C/ 5 kg cm³/10 min 20
Molding shrinkage, parallel/normal b.o. ISO 2577 Value range based on general practical experience % 0.4 - 0.6
Property Name Standard Test condition Unit Value
Relative permittivity IEC 60250 1 MHz 2.9
Relative permittivity IEC 60250 100 Hz 3.0
Surface resistivity IEC 60093 Ohm 1E16
Volume resistivity IEC 60093 Ohm*m 1E14
Property Name Standard Test condition Unit Value
Injection molding - Injection velocity ISO 294 mm/s 240
Injection molding - Melt temperature ISO 294 °C 240
Injection molding - Mold temperature ISO 294 °C 80
Property Name Standard Test condition Unit Value
Density ISO 1183-1 kg/m³ 1180
Water absorption (equilibrium value) ISO 62 23 °C; 50 % r. h. % 0.1
Water absorption (saturation value) ISO 62 Water at 23 °C % 0.4

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com

Related topics

Do you want to know more about Bayblend® FR3000 BBS300?
Get in touch with our experts!

Contact form image Zoe

How can we contact you?

* Mandatory Fields

Compare