Submit
  • Lacke

Bayhydrol® A 2695

Kontaktieren Sie einen Experten
i
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
In die Zwischenablage kopiert

Über

Materialklassen

  • Acrylatdispersion

Material

Lacke
hart, wasserbasiert, flexibel, elastisch

Allgemeine Charakterisierung

Keine Daten verfügbar

Lagerungsbedingungen

Bayhydrol A 2695 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. The product is sensitive to freezing. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation.
The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10% solution of triethanol amine.
Storage at temperature above 25°C up to 30°C is possible without irreversibly damaging the product. The decrease of pH value and viscosity, however, might be accelerated at this temperature. The values may possibly fall below the lower limits set forth in section “specification” even within the 6 month representation period. Recommended storage temperature is > 0º-25ºC.

Probenahme

Keine Daten verfügbar

Verpackungsart

Keine Daten verfügbar

Technische Eigenschaften & Datenblätter

Name der Eigenschaft Prüfverfahren Einheit Wert
pH (1:4 in demineralized water) 7.2 - 8.2
Non-volatile content (1g/1h/125°C) % 40 - 43
Viscosity at 23°CD= approx. 40s-1 mPa∙s 2,000 - 3,500

Name der Eigenschaft Prüfverfahren Einheit Wert
Density at 20°C g/ml approx. 1.06
Hydroxyl content (calculated on solid resin) % approx. 5.0
Flash point (no flash point up to initial boiling point) °C > 95
Equivalent weight g/mol approx. 830
Acid value mg KOH/g approx. 9.4
Flash point (no flash point up to initial boiling point) °C > 95
Density at 20°C g/ml approx. 1.06
Hydroxyl content (calculated on solid resin) % approx. 5.0
Equivalent weight g/mol approx. 830
Acid value mg KOH/g approx. 9.4

Downloads

Technisches Datenblatt
Sicherheitsdatenblatt
Kein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com
Download

Möchten Sie mehr über Bayhydrol® A 2695 erfahren?
Setzen Sie sich mit unseren Experten in Verbindung!

Contact form image Zoe

Wie können wir Sie kontaktieren?

* Pflichtfelder

1 Produkt für einen Vergleich