- Lacke, Farben & Druckfarben
Bayhydrol® UH 650
i
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
Über
Materialklassen
- Dispersion
- Nicht reaktives System
- Polyurethan
- Wässrige Dispersionen
- PU-Dispersionen-hochmolekular
- PU-Dispersion
Material
- Lacke, Farben & Druckfarben
- niedrigviskos, lösemittelfrei, leicht mischbar, Flexibel, Elastisch, Wasserbasiert
Allgemeine Charakterisierung
Solvent-free, aliphatic polyurethane resin dispersion in water.
Binder for waterborne, air- and oven-drying base coats in two-coat systems for the coating of plastics and as a combination binder for soft-touch coatings.
Binder for waterborne, air- and oven-drying base coats in two-coat systems for the coating of plastics and as a combination binder for soft-touch coatings.
Lagerungsbedingungen
- Storage in original sealed Covestro containers.
- Recommended storage temperature: 5 - 30 °C.
- Protect fromfrost , heat and foreign material.
General information: Because slight sedimentation may occur during storage, homogonize thoroughly (e.g. by stirring) prior to removing product. If the containers are not kept well closed, a non-redispersible film is formed as a result of the evaporation of water. The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: 5 - 30 °C.
- Protect from
General information: Because slight sedimentation may occur during storage, homogonize thoroughly (e.g. by stirring) prior to removing product. If the containers are not kept well closed, a non-redispersible film is formed as a result of the evaporation of water. The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unusable.
Probenahme
Keine Daten verfügbar
Verpackungsart
Keine Daten verfügbar
Technische Eigenschaften & Datenblätter
Genannte Eigenschaften Merkmale
Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
---|---|---|---|
Minimum film forming temperature(MFT) | DIN ISO 2115 | °C | < 0 |
Density at 20 °C | DIN EN ISO 2811 | g/ml | approx. 1.1 |
Genannte Eigenschaften Spezifikation
Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
---|---|---|---|
pH | DIN ISO 976 | 6 - 8 | |
Non-volatile content (1 g/1 h/125 °C) | DIN EN ISO 3251 | % | 48 - 52 |
Viscosity at 23°C spindle L2/30 rpm | M092-ISO 2555 | mPa.s | < 500 |
Downloads
-
Technisches Datenblatt
-
SicherheitsdatenblattKein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com
Ähnliche Themen
- Bayhydrol®
- Automobilindustrie
- Eisenbahn
- Automobilexterieur
- Bahninterieur
- Fahrzeuginnenraum
- Bahnexterieur
- Lacke, Farben & Druckfarben
- niedrigviskos
- lösemittelfrei
- leicht mischbar
- Flexibel
- Elastisch
- Wasserbasiert
- Dispersion
- Nicht reaktives System
- Polyurethan
- Wässrige Dispersionen
- PU-Dispersionen-hochmolekular
- PU-Dispersion
- 1K lufttrocknend
- Wasserbasierte Lacke & Farben