i
市场转换
选择会影响你得到的结果。
关于
材料类型
- 散体
- 非反应型体系
- 聚氨酯
- 水性分散体
- 高分子聚氨酯分散体
- 聚氨酯分散体
材料
- 涂料、油漆和油墨
- 低粘性, 无溶剂, 易混合, 柔韧, 弹性, 水性
一般特征
Aliphatic anionic polyester polyurethane dispersion.
As a combination binder in the formulation of highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for use on plastics.
As a combination binder in the formulation of highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for use on plastics.
储存条件
- Storage in original sealed Covestro containers.
- Recommended storage temperature: 5 - 40 °C.
- Protect fromfrost , heat and foreign material.
General information: An increase in viscosity may occur during storage. If the containers are not sealed properly, the evaporation of water will result in the formation of a film which cannot be redispersed. The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: 5 - 40 °C.
- Protect from
General information: An increase in viscosity may occur during storage. If the containers are not sealed properly, the evaporation of water will result in the formation of a film which cannot be redispersed. The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unusable.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Density at 20 °C | DIN EN ISO 2811-2 | g/ml | approx. 1.1 |
| Appearance | milky, cloudy | ||
| Minimum film forming temperature (MFT) | DIN ISO 2115 | °C | < 0 |
| Acid value | DIN EN ISO 2114 | mg KOH/g | approx. 0.5 |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Non-volatile content (1 g/1 h 125 °C) | DIN EN ISO 3251 | % | 39 - 41 |
| pH | DIN ISO 976 | 6 - 8 | |
| Mean particle size | photon correlation spectroscopy | nm | max. 210 |
| Viscosity at 23 °C,(D = 40 s^-1) | DIN EN ISO 3219/A.3 | mPa∙s | < 150 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
