i
市场转换
选择会影响你得到的结果。
关于
材料类型
- 散体
- 丙烯酸酯分散体
材料
- 涂料、油漆和油墨
- 坚硬, 耐热, 水性, 柔韧, 弹性
一般特征
Bayhydrol A 2227/1 is a polyester-polyacrylate dispersion.
It is suitable for use in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. It is also suitable for use in the formulation of two-component polyurethane primers and top coats for plastics.
It is suitable for use in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. It is also suitable for use in the formulation of two-component polyurethane primers and top coats for plastics.
储存条件
Bayhydrol A 2227/1 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. This product is sensitive to freezing. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Recommended storage temperature is greater than 0º-23ºC.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Minimum film forming temperature (MFT) | °C | < 0 | |
| Density at 20°C | g/ml | approx. 1.06 | |
| Hydroxyl content , calculated | % | approx. 3.8 | |
| Flash point | °C | > 98 | |
| Mean particle size | nm | < 150 |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Acid value | mg KOH/g | 7 - 10 | |
| pH (1:3 in demineralized water) | 7.5 - 8.5 | ||
| Non-volatile content (1g/1h/125°C convection oven) | % | 41 - 43 | |
| Viscosity at 23°C, (D= approx. 40 s^-1) | mPa∙s | 700 - 2,500 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
