i
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
Über
Materialklassen
Keine Daten verfügbar
Material
Keine Daten verfügbar
Allgemeine Charakterisierung
Modified waterborne polyurethane dispersion
Specifically suit for non-polar surface, e.g. PE, PP substrates. Provide direct adhesion to non-polar surfaces without pre-treatments, such as primer, flame, plasma, etc.
Could be used as one component
Specifically suit for non-polar surface, e.g. PE, PP substrates. Provide direct adhesion to non-polar surfaces without pre-treatments, such as primer, flame, plasma, etc.
Could be used as one component
Lagerungsbedingungen
- Storage in original sealed Covestro containers.
- Recommended storage temperature: 5 - 23 °C, temperatures higher than 30 °C should be avoided
- Protect from frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing can damage the product irreversibly. Prolonged storage at higher temperatures may affect the product properties and possibly resulting in sedimentation or coagulation. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.Contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: 5 - 23 °C, temperatures higher than 30 °C should be avoided
- Protect from frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing can damage the product irreversibly. Prolonged storage at higher temperatures may affect the product properties and possibly resulting in sedimentation or coagulation. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.Contamination with certain bacteria, fungi or algae may render the product unusable.
Probenahme
Keine Daten verfügbar
Verpackungsart
Keine Daten verfügbar
Technische Eigenschaften & Datenblätter
Genannte Eigenschaften Merkmale
Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
---|---|---|---|
Minimum film-forming temperature | DIN ISO 2115 | °C | < 5 |
Density at 20 °C | DIN EN ISO 2811/3 | g/ml | approx. 1.1 |
Genannte Eigenschaften Spezifikation
Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
---|---|---|---|
pH-value (20°C, supply form) | DIN ISO 976 | 6.0 - 9.0 | |
Viscosity at 23°C spindle L1/30 rpm | M092-ISO 2555 | mPa.s | < 200 |
Non-volatile content (1g / 1h / 125 °C, convection oven) | DIN EN ISO 3251 | % | 33 - 38 |
These characteristic data are tentative values |
Downloads
-
Technisches Datenblatt
-
SicherheitsdatenblattKein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com