Before working with this product, you must read and become familiar with the available information regarding its risks, proper use, and safe handling. This information is provided in various formats, including the current Safety Data Sheet (SDS) and product label. SDS can be accessed via the following link:
Safety Data Sheets (SDS) for Covestro products | Covestro
For further questions, please use the contact information provided on this technical data sheet.
Product description
Baytec MP-160 is a modified diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer is based on polypropylene ether glycol (PPG).
Applications
Baytec MP-160 can be used in the formulation of binders, cast elastomers, two-component adhesives, caulks and sealants, and spray elastomer systems. Typical applications include polyurea spray systems for concrete. As with any product, use of Baytec MP-160 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| NCO content | 16,2 - 16,7 | wt.-% | ||
| Viscosity | at 25°C | max. 1,000 | mPa•s |
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Appearance | Clear, amber liquid | |||
| Specific gravity | at 25°C | 1,12 | ||
| Flash point | (PMCC) | > 93 | °C | |
| Density | at 25°C | 9,35 | lb/gal |
Storage
Baytec MP-160 prepolymer must be stored in tightly closed containers and protected from contamination with moisture and foreign materials, which can adversely affect processing. It will react slowly with water to form ureas and carbon dioxide gas, which may cause sealed containers to expand and rupture. Partially filled containers should be blanketed with dry nitrogen. Storage temperatures should be maintained between 15°C to 35°C (59°F to 95°F). Under these conditions, Baytec MP-160 prepolymer will remain clear for periods of up to six months from date of receipt. Within this range, lower storage temperatures will maximize the storage life of this product. Baytec MP-160 prepolymer must not be allowed to freeze. Exposure to temperatures less than 15°C (59°F), even for short periods of time, can result in the formation of solid material. During the winter months, appropriate precautions must be taken during shipment and storage. Prolonged storage of solid or partially solid Baytec MP-160 prepolymer may result in the formation of MDI dimer in amounts that exceed its solubility in the prepolymer at normal storage temperatures. This can make the product unusable.If solids should form because of exposure of Baytec MP-160 prepolymer to low temperatures, it may be possible to reliquify the product by heating. Use a well-ventilated oven for the minimum time necessary to render it clear. The temperature of the product should not exceed 60°C (140°F). Agitation or drum rollers are recommended to avoid excessive local heating, which will degrade the product. Significant amounts of MDI dimer may form during the heating process. As a result, the remelted diisocyanate may be cloudy, and the processing behavior and/or properties of the final product may be affected.
Health and Safety Information
Disclaimer
Responsibility and Liability
The use of Covestro products, technical assistance, and information (regardless of how provided) is outside Covestro’s control and is solely the responsibility of the customer. The customer must conduct adequate testing to determine the suitability of products for its intended use, including but not limited to technical, health, safety, and environmental aspects. Unless otherwise agreed in writing, all products are sold exclusively under Covestro’s standard conditions of sale, which prevail in case of conflict and are available upon request.
The terms and conditions of sale and delivery are available via the following link:
https://order.covestro.com/covestrostorefront/saleConditions
All information is provided “as is” without warranties, express or implied, including merchantability or fitness for a particular purpose, and is subject to change without notice. To the maximum extent permitted by law, Covestro disclaims, and the customer assumes all liability for losses, damages, or claims arising out of use of Covestro products, technical assistance, or information. Any statement or recommendation not expressly contained in Covestro documentation is unauthorized and shall not bind Covestro. Nothing herein shall be construed as encouraging or recommending the use of any product in conflict with any claim of any patent. No license is implied or in fact granted under the claims of any patent.
Restrictions on Regulated Applications
This product is not intended for use in regulated applications such as agriculture, cosmetics, drinking water contact, food contact, medical products (e.g., medical devices), toys, or similar uses subject to specific regulatory requirements. Prior written approval from Covestro is required before this product may be used in any regulated application. The customer is solely responsible for ensuring compliance with all applicable laws and determining product suitability. Covestro disclaims all liability and warranties for unauthorized regulated uses.
Typical Value
The values provided are typical only and do not represent binding specifications. Unless expressly confirmed in a written contract, these values are not part of the contractual quality agreement and must not be relied upon as a warranty or guarantee of product performance.
Sample
Samples provided by Covestro are intended solely for evaluation and testing purposes by the customer and may not be used in commercial applications, resold, transferred to third parties (except qualified testing service providers acting on behalf of the customer), reverse engineered, modified, or used in any manner not explicitly authorized in writing by Covestro. Samples are provided ‘as-is’ without any warranties, express or implied, including fitness for a particular purpose. Customers are solely responsible for ensuring safe handling, regulatory compliance, and suitability of the material for their intended evaluations. Covestro disclaims all liability for damages or losses arising from the use of samples.
Contact Information
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .
