i
市场转换
选择会影响你得到的结果。
关于
材料类型
- 散体
- 丙烯酸酯分散体
材料
- 涂料、油漆和油墨
- 坚硬, 水性, 柔韧, 弹性
一般特征
Bayhydrol A 2695 is an aqueous hydroxyfunctional polyacrylic dispersion.
It shows a superior chemical resistance. The resistance can be improved by increasing the NCO/OH ratio.
It shows a superior chemical resistance. The resistance can be improved by increasing the NCO/OH ratio.
储存条件
Bayhydrol A 2695 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. The product is sensitive to freezing. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation.
The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10% solution of triethanol amine.
Storage at temperature above 25°C up to 30°C is possible without irreversibly damaging the product. The decrease of pH value and viscosity, however, might be accelerated at this temperature. The values may possibly fall below the lower limits set forth in section “specification” even within the 6 month representation period. Recommended storage temperature is greater than 0ºC-25ºC.
The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10% solution of triethanol amine.
Storage at temperature above 25°C up to 30°C is possible without irreversibly damaging the product. The decrease of pH value and viscosity, however, might be accelerated at this temperature. The values may possibly fall below the lower limits set forth in section “specification” even within the 6 month representation period. Recommended storage temperature is greater than 0ºC-25ºC.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Hydroxyl content (calculated on solid resin) | % | approx. 5.0 | |
| Density at 20°C | g/ml | approx. 1.06 | |
| Flash point (no flash point up to initial boiling point) | °C | > 95 | |
| Acid value | mg KOH/g | approx. 9.4 | |
| Equivalent weight | g/mol | approx. 830 |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Viscosity at 23°CD= approx. 40s^-1 | mPa*s | 1,000 - 3,500 | |
| Non-volatile content (1g/1h/125°C) | % | 40 - 43 | |
| pH (supply form) | 7.2 - 8.2 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
