2) Based on data for the TPU resins provided by their suppliers and based on suppliers standard/procedure, not measured for film sample.
Product description
Film based on thermoplastic polyester polyurethane
Colour: natural (4100), white (4150), black 4180) (other colours upon request)
Special charactaristics: Multi purpose film with high mechanical strength and good adhesion especially to PU foams
Applications
This product is a multi-purpose grade with versatile applications in various industries. A first overview of our customizable portfolio by application can be found in our TPU films selector tool "TPU Product Search Companion". For further information and selection of the right film for your needs, please contact our sales and technical experts.
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Density | 1) | 1.21 | g/cm³ | calculated |
| Shore Hardness A | 2) | 94 | DIN 7619-1, DIN EN ISO 868 or ASTM D2240 | |
| Softening Range (TMA) | 155 - 175 | °C | TMA Onset-Endset, Internal Method | |
| Tensile stress at break, MD | 3) | 75 | MPa | DIN EN ISO 527-3 |
| Tensile stress at break, CD | 3) | 75 | MPa | DIN EN ISO 527-3 |
| Tensile stress at 50% strain, MD | 6 - 10 | MPa | DIN EN ISO 527-3 | |
| Tensile stress at 50% strain, CD | 6 - 10 | MPa | DIN EN ISO 527-3 | |
| Tensile strain at break, MD | 3) | 430 | % | DIN EN ISO 527-3 |
| Tensile strain at break, CD | 3) | 450 | % | DIN EN ISO 527-3 |
| Tear Propagation Resistance, MD | 3) | 80 | kN/m | ISO 34-1; Method B |
| Tear Propagation Resistance, CD | 3) | 80 | kN/m | ISO 34-1; Method B |
1) Density values were calculated based on information by raw material suppliers and film composition for a reference thickness of 50 μm.
3) The values given are averaged values over a longer period of time for 50 μm films. The average values for certain product variants may vary up to +/- 30% depending on width or orientation.
Custom Manufacturing Capabilities
Typical Film dimensions
| Property | Value | Unit |
|---|---|---|
| Thickness | 25 – 150 (limitations depending on film width) | µ m |
| Width | 20 – 2100 (limitations depending on film thickness) | mm |
Regarding thickness and width, certain interdependencies may apply. Please consult with your customer service representative. Blown film may show an orientation in either machine or cross direction. MD/CD values may vary depending on thickness and width. Our “General Conditions of Sale” also apply.
Health and Safety Information
Before working with this product, you must read and become familiar with the available information regarding its risks, proper use, and safe handling. This information is provided in various formats, including the current Safety Data Sheet (SDS) and product label. SDS can be accessed via the following link:
Safety Data Sheets (SDS) for Covestro products | Covestro
For further questions, please use the contact information provided on this technical data sheet.
Disclaimer
Responsibility and Liability
The use of Covestro products, technical assistance, and information (regardless of how provided) is outside Covestro’s control and is solely the responsibility of the customer. The customer must conduct adequate testing to determine the suitability of products for its intended use, including but not limited to technical, health, safety, and environmental aspects. Unless otherwise agreed in writing, all products are sold exclusively under Covestro’s standard conditions of sale, which prevail in case of conflict and are available upon request.
The terms and conditions of sale and delivery are available via the following link:
https://order.covestro.com/covestrostorefront/saleConditions
All information is provided “as is” without warranties, express or implied, including merchantability or fitness for a particular purpose, and is subject to change without notice. To the maximum extent permitted by law, Covestro disclaims, and the customer assumes all liability for losses, damages, or claims arising out of use of Covestro products, technical assistance, or information. Any statement or recommendation not expressly contained in Covestro documentation is unauthorized and shall not bind Covestro. Nothing herein shall be construed as encouraging or recommending the use of any product in conflict with any claim of any patent. No license is implied or in fact granted under the claims of any patent.
Restrictions on Regulated Applications
This product is not intended for use in regulated applications such as agriculture, cosmetics, drinking water contact, food contact, medical products (e.g., medical devices), toys, or similar uses subject to specific regulatory requirements. Prior written approval from Covestro is required before this product may be used in any regulated application. The customer is solely responsible for ensuring compliance with all applicable laws and determining product suitability. Covestro disclaims all liability and warranties for unauthorized regulated uses.
Typical Value
These values are provided as typical data only and do not constitute binding specifications or warranted performance, unless explicitly agreed by Covestro in writing. Performance may vary depending on factors including, but not limited to, mold/die, processing conditions and coloring/pigmentation. Unless otherwise stated, values are based on standardized test specimens at room temperature.
Sample
Samples provided by Covestro are intended solely for evaluation and testing purposes by the customer and may not be used in commercial applications, resold, transferred to third parties (except qualified testing service providers acting on behalf of the customer), reverse engineered, modified, or used in any manner not explicitly authorized in writing by Covestro. Samples are provided ‘as-is’ without any warranties, express or implied, including fitness for a particular purpose. Customers are solely responsible for ensuring safe handling, regulatory compliance, and suitability of the material for their intended evaluations. Covestro disclaims all liability for damages or losses arising from the use of samples.
Contact Information
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .
