• Lacke
  • Klebstoffe

Dispercoll® C VP LS 2372/1

Kontaktieren Sie einen Experten
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
In die Zwischenablage kopiert



  • Dispersion
  • Polychloropren-Dispersionen


schnellhärtend, lösemittelfrei, wasserbasiert
wasserbasiert, lösemittelfrei, Kontaktklebstoff, Schaumverklebung

Allgemeine Charakterisierung

Aqueous colloidal dispersion of a 2-chlorobutadiene polymer with a low rate of crystallization.
Dispercoll® C VP LS 2372/1 is suitable for the formulation of aqueous adhesives for use in the footwear, construction, furniture, mattress and automotive industries.
Dispercoll® C VP LS 2372/1 is characterized in particular by its long pot life and outstanding adhesion on non-polar substrates.


- Storage in original sealed Covestro container.

- Recommended storage temperature: 10 - 25 °C.

- Protect from frost, heat and foreign material.

General information: This product is sensitive to frost, and must be protected from cold. Frozen product is irreversibly damaged. Containers must be kept sealed as otherwise the evaporation of water will result in the formation of a non-redispersible film. Due to the process, the product can tend toward subsequent creaming. This manifests in the form of a very thin, brown layer which after some time becomes visible on the surface of the product. Prior homogenization of the product using a suitable stirrer is recommended each time product is removed from the container.


Keine Daten verfügbar


220 or 1,000 l Schütz disposable container, tank truck

Technische Eigenschaften & Datenblätter

Genannte Eigenschaften Merkmale

Name der Eigenschaft Prüfverfahren Einheit Wert
Apparent viscosityby the Brookfield Test method (LV / Sp2 / 60 rpm / 25°C) DIN EN ISO 2555 mPa*s approx. 100
pH DIN ISO 976 approx. 13
Non-volatile matter (2 g / 105 °C / 3 h) DIN EN ISO 3251 % approx. 58

Genannte Eigenschaften Spezifikation

Name der Eigenschaft Prüfverfahren Einheit Wert
Appearance light beige
Density DIN 51 757 g/cm3 approx. 1.12
Crystallization low
Minimum film-forming temperature DIN 53 787 °C approx. 5


Technisches Datenblatt
Kein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com