Applications
Addition of 1-3% to water based acrylic emulsions or urethane dispersions produces a marked improvement in water, chemical, abrasion and humidity resistance and enhances adhesion to specific substrates.
Form supplied
Form supplied is approximately 100%
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Appearance | Clear to hazy yellowish liquid | GAP0059 | ||
| Viscosity | at 25°C | 100 - 300 | mPa·s | GAP0020 |
| Refractive index | 1,4690 - 1,4730 | GAP0009 | ||
| Res. Mon.: | Propylene Imine | max. 100 | ppm | GAP0122 |
| Water tolerance | min. 100 | % | ANL-0013 |
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Density at 20ºC | +/- 1,08 | kg/m3 | GAP-0006 |
Solubility / thinnability
CX-100 can be thinned with water and acetone, xylene, isopropanol, n-butyl acetate, carbitol, butyl carbitol.
Storage
Product must be stored in original, unopened packaging in a dry place at storage temperatures between 5 - 35 °C. Exposure to light must be avoided. The product appearance may show variability from clear to turbid; this is a natural effect and cannot be prevented.
Storage time
Covestro represents that, for a period of 6 months (180 days) following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section "specifications or characteristic data" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section "storage" above and is otherwise handled appropriately. The lapse of the 6 months (180 days) period does not necessarily mean that the product no longer meets specifications or the set values. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications or the set values. Covestro does not make any representation regarding the product after the lapse of the 6 months (180 days) period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the 6 months (180 days) period.
