Before working with this product, you must read and become familiar with the available information on its risks, proper use, and handling. Information is available in several forms, e.g., in particular in the currently valid safety data sheets and product labels. For further information contact your Covestro representative.
Product description
Baytec P-132 is a sprayable polyurethane elastomer system.
Applications
Baytec P-132 system spray elastomer forms a tough, mar resistant coating with a hardness of 95 Shore A. As with any product, use of Baytec P-132 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability for use.
Storage
Avoid moisture contamination during storage, handling and processing. For both components, pad containers with either nitrogen or dry air (desiccant cartridge or air dryer at -40°C (-40°F) dew point). Store polyol component from 18°C to 30°C (64°F to 86°F). Mix polyol component to a homogenous state before use and before removing any material from container. For optimum shelf life, the recommended storage temperature for the isocyanate component is 18°C to 30°C (64°F to 86°F). Do not expose isocyanate component to lowers temperatures – material becomes viscous, freezing may occur.
Storage time
Shelf life is 6 months if stored in factory sealed containers.
Processing
*These values provide general information and are not part of the product specification.
Mix Polyol Component B before use and before removing any material from container, but avoid air entrainment. Polyol Component B contains solids. Cycle time depends on part thickness and mold temperature. Protect Isocyanate Component A from moisture.
Health and Safety Information
Disclaimer
Contact
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .
