i
市场转换
选择会影响你得到的结果。
关于
材料类型
- PMDI
材料
无可用数据
一般特征
Mondur MRS 2 is a low functionality polymeric diphenylmethane diisocyanate (pMDI) with a moderately high 2,4’-MDI isomer content.
储存条件
Mondur MRS 2 isocyanate must be stored in tightly closed containers and protected from contamination with moisture and foreign materials, which can adversely affect processing. It will react with water to form ureas and carbon dioxide gas, which may cause sealed containers to expand and rupture. Recommended storage temperatures are 21° to 30°C (70° to 86°F). Under these conditions, Mondur MRS 2 will remain clear for up to six months. Within this range, lower storage temperatures will maximize the storage life of the product. Mondur MRS 2 must not be allowed to freeze. Exposure to temperatures less than 18°C (64°F),can result in the formation of solid material. During the winter months, appropriate precautions must be taken during shipment and storage.
If solids form because of exposure of Mondur MRS 2 to low temperatures, it may be possible to reliquify the product by heating. Use a well-ventilated oven for the minimum time necessary to render it clear. The temperature of the product should not exceed 60°C (140°F). Agitation or drum rollers are recommended to avoid excessive local heating, which will degrade the product.
The use of drum heaters is not recommended since the excessive heating causes dimerization, loss of NCO, and an increase in viscosity. As a result, the re-melted product may be cloudy, and the processing behavior and/or properties of the final product may be affected. Prolonged storage of solid or partially solid Mondur MRS 2 may result in the formation of MDI dimer in amounts that exceed its solubility in the product at normal storage temperatures. This can make the product unusable.
The shelf life is six months after receipt of material by customer, when stored in sealed original containers under conditions stated above.
If solids form because of exposure of Mondur MRS 2 to low temperatures, it may be possible to reliquify the product by heating. Use a well-ventilated oven for the minimum time necessary to render it clear. The temperature of the product should not exceed 60°C (140°F). Agitation or drum rollers are recommended to avoid excessive local heating, which will degrade the product.
The use of drum heaters is not recommended since the excessive heating causes dimerization, loss of NCO, and an increase in viscosity. As a result, the re-melted product may be cloudy, and the processing behavior and/or properties of the final product may be affected. Prolonged storage of solid or partially solid Mondur MRS 2 may result in the formation of MDI dimer in amounts that exceed its solubility in the product at normal storage temperatures. This can make the product unusable.
The shelf life is six months after receipt of material by customer, when stored in sealed original containers under conditions stated above.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
属性名称 | 测试方法 | 单位 | 数值 |
---|---|---|---|
Specific gravity at 25°C | 1.24 | ||
Appearance | Brown/grey liquid liquid | ||
Flash point PMCC | °C | > 93 |
下载
-
技术数据表
-
安全数据表无可用直接下载,请访问 www.productsafetyfirst.covestro.com