Dispercoll® U 58
Aqueous polyurethane dispersion. Dispercoll® U 58 is a waterborne dispersion of an anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for use in e.g. the shoe, furniture or automotive industries. Its characteristic polymer properties make Dispercoll® U 58 particularly well suited for heat activated bonding applications with high tack and good initial heat resistance.
i
市场转换
选择会影响你得到的结果。
关于
材料类型
无可用数据
材料
无可用数据
一般特征
Dispercoll U 58 is an aqueous polyurethane dispersion.
Dispercoll U 58 is a waterborne dispersion of an anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for use in e.g. the shoe, furniture or automotive industries. Its characteristic polymer properties make Dispercoll U 58 particularly well suited for heat activated bonding applications with high tack and good initial heat resistance.
Dispercoll U 58 is a waterborne dispersion of an anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for use in e.g. the shoe, furniture or automotive industries. Its characteristic polymer properties make Dispercoll U 58 particularly well suited for heat activated bonding applications with high tack and good initial heat resistance.
储存条件
Dispercoll U 58 should be stored in tightly sealed original containers and protected from direct sunlight, freezing, heat, and foreign materials. The product is sensitive to temperatures below +10°C. Temperatures below to + 10°C can damage the product irreversibly. Temperatures higher than 30°C should be avoided. Prolonged storage at higher temperatures may affect the product properties. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film. Recommended storage temperature is 15º-25ºC, temperatures higher than 30°C should be avoided.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Density | g/cm^3 | approx. 1.1 | |
| Minimum film forming temperature | °C | > 10 |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Viscosity at 23^oCspindle L 2 / 30 rpm | mPa∙s | 50 - 800 | |
| Non-volatile content (1g / 1h / 125^oC) | % | 49 - 51 | |
| pH value | 6.0 - 9.0 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
