i
市场转换
选择会影响你得到的结果。
关于
材料类型
- 散体
- 纳米二氧化硅分散体
材料
- 胶粘剂
- 水性, 耐热, 无溶剂, 接触型粘合剂
一般特征
Dispercoll S 3030/1 is an aqueous anionic colloidal solution of amorphous silicon dioxide.
Dispercoll S 3030/1 is intended as a component for waterborne polychloroprene adhesives based on Dispercoll C dispersions. The proper viscosity for a particular application can be obtained through the addition of nano-zinc oxide to the adhesive formulation. These adhesive formulations will show improved moisture resistance and a higher heat resistance.
Dispercoll S 3030/1 is intended as a component for waterborne polychloroprene adhesives based on Dispercoll C dispersions. The proper viscosity for a particular application can be obtained through the addition of nano-zinc oxide to the adhesive formulation. These adhesive formulations will show improved moisture resistance and a higher heat resistance.
储存条件
Dispercoll S 3030/1 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. The product is sensitive to freezing and must not be stored at temperatures below 5°C. Frozen product is irreversibly damaged. Containers must be kept sealed, otherwise the evaporation of water or contamination will result in damage to the material. Recommended storage temperature is 10º-25ºC.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
属性名称 | 测试方法 | 单位 | 数值 |
---|---|---|---|
Density | g/cm^3 | approx. 1.21 | |
Specific surface | m^2/g | approx. 300 | |
Average particle size | nm | approx. 9 | |
pH | approx. 10.5 |
命名属性规范
属性名称 | 测试方法 | 单位 | 数值 |
---|---|---|---|
Ignition Residue | % | 30 - 31 |
下载
-
技术数据表
-
安全数据表无可用直接下载,请访问 www.productsafetyfirst.covestro.com