Desmodur® VP.PU 0129 can be used in combination with polyol for the manufacturing of polyurethane products.
Product description
Desmodur® VP.PU 0129 is a mixture of 4,4'-, 2,4'- and 2,2'-diphenylmethanediisocyanate with a relatively high content of 2,4'-isomers which is liquid at 25 °C.
Applications
Sampling
Moisture access must be prevented when taking product samples.
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Hydrolyzable chlorine content | ≤ 50 | mg/kg | MDI-01-04 | |
| 4,4'-MDI content | ≥ 39.2 | % | MDI-01-06 | |
| 2,2'-MDI content | ≤ 0.8 | % | MDI-01-06 | |
| 2,4'-MDI content | 50 - 60 | % | MDI-01-06 |
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Purity | min. 99.5 | % by wt. | MDI-01-01 | |
| NCO content (theoretical) | 33.6 | % by wt. | ||
| Viscosity | 25 °C | 12 ± 2 | mPa·s | MDI-01-02 |
| Density | 25 °C | approx. 1.21 | g/cm³ | DIN 51757 |
This data is provided as general information only and are not part of the product specifications.
Storage
Storage in original sealed Covestro containers.
Recommended storage temperature: 20 - 40 °C.
Protect from moisture, heat and foreign material.
It must be ensured that the containers - including empty tanks and containers - are kept sealed.
Above all, contact with water must be prevented as it reacts with Desmodur® VP.PU 0129 to form polyureas and carbon dioxide. During storage, sample withdrawal, transfer and processing of Desmodur® VP.PU 0129, the ingress of water in any form (damp containers, aqueous solvents, moist air) must be prevented as otherwise the formation of carbon dioxide may cause a dangerous increase in pressure in the tanks and containers. Furthermore, the formation of polyureas in Desmodur® VP.PU 0129 may cause turbidity and possibly solid deposits which may then block filters, pumps and pipelines.
Storage time
Covestro certifies that the product meets specifications for 6 months from the date of shipment, provided it is stored and handled in accordance with the conditions specified in the ‘Storage’ section. After this period, product performance is not assured; Customers are responsible for retesting material before use. Covestro assumes no liability for product performance after 6 months.
Processing
The product is sensitive to moisture and should therefore be stored in its sealed original containers. Prolonged storage at temperatures above 40 °C results in a deterioration in quality as the product becomes increasingly turbid owing to the formation of a sediment (dimers) that is not readily soluble. Storage at to low temperature results in crystallization, which starts at around 20 °C. The product tends to discolor (yellow to red) on contact with air and exposure to light during storage, but this does not appreciably affect quality. The storage of the crystallized product above 5 °C must be avoided as this promotes the formation of non-meltable dimers. As a result, the product can no longer be fully melted after around 3 weeks. To prevent crystallization, it must be ensured that the product does not cool to below 20 °C. Upon receipt, samples of the product should be tested for crystallization. If crystallization has occurred during transportation or storage, the product must be remelted immediately. On no account should the temperature during melting (material temperature) exceed 70 °C nor should the time needed to reliquefy the product be exceeded as this will greatly promote the formation of non-meltable dimers. It should be ensured that the entire content of the container is remelted and homogenized. The container must then be closed immediately and its content cooled to and kept at the recommended storage temperature. If the product is in a partially crystallized state for a brief period, there will be no significant effect on the product quality. Only the storage stability may be reduced slightly, i.e. remelted product should be used as soon as possible.
Health and Safety Information
Before working with this product, you must read and become familiar with the available information regarding its risks, proper use, and safe handling. This information is provided in various formats, including the current Safety Data Sheet (SDS) and product label. SDS can be accessed via the following link:
Safety Data Sheets (SDS) for Covestro products | Covestro
For further questions, please use the contact information provided on this technical data sheet.
Disclaimer
Responsibility and Liability
The use of Covestro products, technical assistance, and information (regardless of how provided) is outside Covestro’s control and is solely the responsibility of the customer. The customer must conduct adequate testing to determine the suitability of products for its intended use, including but not limited to technical, health, safety, and environmental aspects. Unless otherwise agreed in writing, all products are sold exclusively under Covestro’s standard conditions of sale, which prevail in case of conflict and are available upon request.
The terms and conditions of sale and delivery are available via the following link:
https://order.covestro.com/covestrostorefront/saleConditions
All information is provided “as is” without warranties, express or implied, including merchantability or fitness for a particular purpose, and is subject to change without notice. To the maximum extent permitted by law, Covestro disclaims, and the customer assumes all liability for losses, damages, or claims arising out of use of Covestro products, technical assistance, or information. Any statement or recommendation not expressly contained in Covestro documentation is unauthorized and shall not bind Covestro. Nothing herein shall be construed as encouraging or recommending the use of any product in conflict with any claim of any patent. No license is implied or in fact granted under the claims of any patent.
Restrictions on Regulated Applications
This product is not intended for use in regulated applications such as agriculture, cosmetics, drinking water contact, medical products (e.g., medical devices), toys, or similar uses subject to specific regulatory requirements. Prior written approval from Covestro is required before this product may be used in any regulated application. The customer is solely responsible for ensuring compliance with all applicable laws and determining product suitability. Covestro disclaims all liability and warranties for unauthorized regulated uses.
Typical Value
The values provided are typical only and do not represent binding specifications. Unless expressly confirmed in a written contract, these values are not part of the contractual quality agreement and must not be relied upon as a warranty or guarantee of product performance.
Sample
Samples provided by Covestro are intended solely for evaluation and testing purposes by the customer and may not be used in commercial applications, resold, transferred to third parties (except qualified testing service providers acting on behalf of the customer), reverse engineered, modified, or used in any manner not explicitly authorized in writing by Covestro. Samples are provided ‘as-is’ without any warranties, express or implied, including fitness for a particular purpose. Customers are solely responsible for ensuring safe handling, regulatory compliance, and suitability of the material for their intended evaluations. Covestro disclaims all liability for damages or losses arising from the use of samples.
Contact Information
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .
