i
市场转换
选择会影响你得到的结果。
关于
材料类型
- HDI
- PIC
- 预聚物
- 聚异氰酸酯
- 异氰酸酯
- 反应型体系
材料
- 涂料、油漆和油墨
- 柔韧, 弹性, 无溶剂
一般特征
Aliphatic ester groups containing prepolymer based on hexamethylene-1,6-diisocyanate (HDI).
Hardener for polyurethane coatings.
Hardener for polyurethane coatings.
储存条件
- Storage in original sealed Covestro container.
- Recommended storage temperature: 20 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in tightly sealed containers. Storage at elevated temperatures will lead to an increase in viscosity and a reduction of the NCO content. Storage at low temperature - below 20°C - may lead to turbidity and crystalline separation. This process is reversible. By careful heating, up to max. 50°C, the product can be dissolved again. The product properties are not affected in this case.
- Recommended storage temperature: 20 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in tightly sealed containers. Storage at elevated temperatures will lead to an increase in viscosity and a reduction of the NCO content. Storage at low temperature - below 20°C - may lead to turbidity and crystalline separation. This process is reversible. By careful heating, up to max. 50°C, the product can be dissolved again. The product properties are not affected in this case.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| NCO equivalent weight | g | approx. 380 | |
| Density at 20 °C | DIN 51 757 | g/cm^3 | approx. 1.11 |
| Flash point | DIN EN ISO 2719 | °C | approx. 184 |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| NCO-content | M105-ISO 11909 | % | 10.3 - 11.5 |
| Monomer content | M106-ISO 10283 | % | < 0.3 |
| Viscosity (23 °C) | M014-ISO 3219/A.3 | mPa*s | 1,200 - 1,900 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
