Submit
  • 涂料

Desmodur® BL 4265 SN

联系专家
i
市场转换
选择会影响你得到的结果。
复制到剪贴板

关于

材料类型

  • PIC
  • 交联剂
  • 固化剂
  • 脂肪族聚异氰酸酯
  • 异氰酸酯
  • 聚异氰脲酯
  • 聚异氰酸酯

材料

涂料
坚硬, 耐热, 溶剂型

一般特征

Desmodur BL 4265 SN is a blocked, aliphatic polyisocyanate based on isophorone diisocyanate (IPDI).
It is suitable for use in combination with polyol components to formulate lightfast one-component stoving coatings.

储存条件

Desmodur BL 4265 SN should be stored in tightly sealed original containers and protected from moisture, heat, and foreign materials. Recommended storage temperature is 0º-30ºC.
General Information: The product is sensitive to moisture and should therefore be stored in its sealed original containers. Prolonged storage at temperatures above 25°C results in a deterioration in quality as the product becomes increasingly turbid owing to the formation of a sediment (dimers) that is not readily soluble. For example, storage stability at 40°C is limited to a maximum of 4 months. Storage at too low a temperature results in crystallization which starts at around 15°C. The storage of the crystallized product must be avoided as this promotes the formation of non-meltable dimers. As a result, the product can no longer be fully melted after around three weeks. To prevent crystallization, it must be ensured that the product does not cool to below 20°C.
Upon receipt, samples of the product should be tested for crystallization. If crystallization has occurred during transportation or storage, the product must be remelted immediately. On no account should the temperature during melting (material temperature) exceed 70°C nor should the time needed to reliquefy the product be exceeded as this will greatly promote the formation of non-meltable dimers. It should be ensured that the entire content of the container is remelted and homogenized. The container must then be closed immediately and its content cooled to and kept at the standard storage temperature (20 - 25°C). If the product is in a partially crystallized state for a brief period, there will be no significant effect on the product quality. Only the storage stability may be reduced slightly, i.e. remelted product should be used as soon as possible.

样品

无可用数据

包装类型

无可用数据

技术属性和数据表

属性名称 测试方法 单位 数值
Non-volatile content (0.2 g / 60 min / 125oC) % 65 ± 2
Free NCO content (modified) % < 0.2
Viscosity at 23oC mPa∙s 11,000 ± 3,000
Hazen color value ≤ 100

属性名称 测试方法 单位 数值
Blocked NCO content % approx. 8.1
Flash point °C approx. 47
Density at 20°C g/ml approx. 1.03
Equivalent weight approx. 520
Viscosity at 25° mPa∙s approx. 10,500

下载

技术数据表
安全数据表
无可用直接下载,请访问 www.productsafetyfirst.covestro.com
Download

你想知道更多关于 Desmodur® BL 4265 SN?
与我们的专家取得联系!

Contact form image Zoe

我们如何联系您?

* 必填字段

要比较1种产品