i
市场转换
选择会影响你得到的结果。
关于
材料类型
- 散体
- 丙烯酸酯分散体
材料
- 泡沫
- 柔韧
- 涂料、油漆和油墨
- 弹性, 坚硬, 水性
一般特征
Aqueous hydroxyfunctional polyacrylic dispersion, in combination with aliphatic polyisocyanates for waterborne 2K-polyurethane coatings.
储存条件
- Storage in original sealed Covestro containers.
- Recommended storage temperature: > 0 ≤ 30 °C.
- Protect from frost, heat and foreign material.
General information: Short-time cooling down to -18 °C does not typically damage the product. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation.
The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10 % solution of dimethyl ethanol amine.
Contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: > 0 ≤ 30 °C.
- Protect from frost, heat and foreign material.
General information: Short-time cooling down to -18 °C does not typically damage the product. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation.
The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10 % solution of dimethyl ethanol amine.
Contamination with certain bacteria, fungi or algae may render the product unusable.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Alternative carbon share ^1 bio-based, calculation without water content | calculated | % | approx. 15 |
| Alternative raw material share ^1 bio-based, calculation without water content | calculated | wt.-% | approx. 11 |
| OH % on solid | calculated | % | approx. 3.9 |
| Density at 20 °C | DIN EN ISO 2811 | g/ml | approx. 1.06 |
| Acid value | DIN EN ISO 2114 | mg KOH/g | approx. 11 |
| ^1 not originating from primary fossil sources |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Viscosity at 23 °C, D = approx. 40 s^-1 | DIN EN ISO 3219/A.3 | mPa*s | ≤ 1,200 |
| pH-value | DIN ISO 976 | 7 - 9 | |
| Non-volatile content (1 g/1 h/125 °C/circulating air oven) | DIN EN ISO 3251 | % | 42 - 46 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
