Submit
Story

Uralac® Ultra: FAQs

What is the difference between powder coating and conventional paint? Is powder better than paint? Is it more durable? And economical? Find out here, in our frequently asked questions.
Technology

Frequently asked questions

For application of the powder, moisture within the MDF is used for conductivity. A moisture content of 4-8% of total weight is sufficient to attract the powder.
No special MDF is needed for powder coating – although there are differences between available qualities and types.
We advise evaluating the type of MDF you intend to use before making your products.
Further, we recommend a conditioned storage area to control the MDF's moisture content.

Most conventional curing ovens are convection ovens. Best results for MDF are reached with infrared radiation (IR) ovens.
With IR ovens, the MDF's surface can be heated quickly to cure the powder coating, while its core stays relatively cool.
With convection ovens, temperatures are often too high, or the MDF's core heats up too much because of the longer period needed to reach curing temperatures.



You can use a  standard powder coating spray booth.
However, we highly recommend you install an active counter electrode opposite the spray guns. An active counter electrode helps control the electric field and powder wrapping around the board. This results in less powder consumption and a much better finish.

You can use a standard powder coating spray booth.
However, we highly recommend you install an active counter electrode opposite the spray guns. An active counter electrode helps control the electric field and powder wrapping around the board. This results in less powder consumption and a much better finish.


Coaters that have made the switch from liquid to powder coating all report a clear price benefit for the powder coating solution.
At Covestro in Zwolle, the Netherlands, we provide a pilot line that can coat products up to approximately 1*2 meters/approx. 3.3*6.6 feet

Make an appointment for a test

Yes. Like with any powder coating, you can collect and reuse overspray with a recycling cyclone.
Yes. Like with any powder coating, for a color change, you clean the application booth and application equipment with pressurized air. You then simply refill the station with a new color.
Yes. Uralac® Ultra-based powder coatings are available for exterior use. The interior grade is resistant to yellowing by sunlight.
Additionally, we provide an outdoor grade with excellent  gloss retention for exterior use.

Powder coatings can show more orange peel than liquid coatings.

Uralac® Ultra-based powder coatings, however, are available in extremely smooth grades, achieving many different gloss levels and colors.

Moreover, powder coating also offers other possibilities – such as fine and coarse textures, hammer finishes, and metallics.

您希望了解 Uralac® Ultra 的更多信息?

联系我们,获取最新动态、更多信息和个人建议。

联系我们

与我们的专家取得联系!

Contact form image Zoe

我们如何联系您?

您希望了解哪种材料?

您希望进行哪种类型的查询?

如何联系您?

* 必填字段

Compare