i
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
Über
Materialklassen
Keine Daten verfügbar
Material
Keine Daten verfügbar
Allgemeine Charakterisierung
Impranil® DL 1545 has excellent bonding properties on many synthetic and natural materials. For heat activation bonding application with Impranil® DL 1545, a bond line temperature in the range of 80-100°C or even higher is recommended to allow the dried adhesive to be fully activated for bongding. The actual temperature needed for specific application will depend on the time in press, the pressure applied and the substrates being bonded
Lagerungsbedingungen
- Storage in original Covestro container.
- Recommended storage temperature: 10 - 23 °C. Temperatures higher than 30 °C should be avoided.
- Protect from frost, heat and foreign material.
General information: The product cannot be used if it has been frozen. Freezing can damage the product irreversibly. Prolonged storage at higher temperature may affect the product properties and possibly resulting in sedimentation or coagulation. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film.
- Recommended storage temperature: 10 - 23 °C. Temperatures higher than 30 °C should be avoided.
- Protect from frost, heat and foreign material.
General information: The product cannot be used if it has been frozen. Freezing can damage the product irreversibly. Prolonged storage at higher temperature may affect the product properties and possibly resulting in sedimentation or coagulation. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film.
Probenahme
Keine Daten verfügbar
Verpackungsart
Keine Daten verfügbar
Technische Eigenschaften & Datenblätter
Genannte Eigenschaften Merkmale
| Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
|---|---|---|---|
| Minimum film-forming temperature (MFT) film forming | DIN ISO 2115 | °C | approx. 5 |
| Density at 20ºC | DIN EN ISO 2811/3 | g/cm3 | ca. 1,1 |
Genannte Eigenschaften Spezifikation
| Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
|---|---|---|---|
| Viscosity at 23°C spindle L2/30 rpm | DIN EN ISO 3219 | mPa*s | ≤ 1,000 |
| Non-volatile content (0.9-1.1g / 1 h / 125 °C) | DIN EN ISO 3251 | % | 44 - 46 |
| pH value | DIN ISO 976 | 6,0 - 9.0 |
Downloads
-
Technisches Datenblatt
-
SicherheitsdatenblattKein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com
