Desmophen® 3267 - for flexible slabstock foams
i
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
Über
Materialklassen
- Polyol
Material
Keine Daten verfügbar
Allgemeine Charakterisierung
In combination with conventional polyether polyols, Desmophen 3267 is used for the production of flexible slabstock foams with enhanced hardness. The typical amounts range from 5 - 10 p.b.w. Desmophen 3267 is BHT-free.
Lagerungsbedingungen
Recommended storage temperature (°C) 5 to 35
The product must be stored in sealed, moisture-tight containers. Partially used
containers should be tightly resealed, due to the hygroscopic nature of the
product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately. The lapse of this period does not necessarily mean that the
product no longer meets specifications. However, prior to using said product,
Covestro recommends to test such a product if it still meets the specifications.
Covestro does not make any representation regarding the product after the
period and Covestro shall not be responsible or liable in any way for the product
failing to meet specifications after the period
The product must be stored in sealed, moisture-tight containers. Partially used
containers should be tightly resealed, due to the hygroscopic nature of the
product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately. The lapse of this period does not necessarily mean that the
product no longer meets specifications. However, prior to using said product,
Covestro recommends to test such a product if it still meets the specifications.
Covestro does not make any representation regarding the product after the
period and Covestro shall not be responsible or liable in any way for the product
failing to meet specifications after the period
Probenahme
The access of moisture in any form must be prevented.
Verpackungsart
Keine Daten verfügbar
Technische Eigenschaften & Datenblätter
Genannte Eigenschaften Merkmale
| Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
|---|---|---|---|
| Density at 25 °C | DIN 51757 | g/cm³ | ca. 1,06 |
| TDI basic value | pbw Desmodur® T on 100 pbw Demophen® 3267 | 0,27 |
Genannte Eigenschaften Spezifikation
| Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
|---|---|---|---|
| Hydroxyl number | PET-11-01 | mg KOH/g | 160 - 190 |
| Viscosity at 25 °C | PET-10-01 | mPa*s | 805 - 945 |
| Water content | PET-19-01 | Gew.-% | ≤ 0,15 |
| Viscosity at 25 °C | PET-10-01 | mPa*s | 805 - 945 |
| Water content | PET-19-01 | Gew.-% | ≤ 0,15 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 160 - 190 |
Downloads
-
Technisches Datenblatt
-
SicherheitsdatenblattKein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com
